Subject: | |
From: | |
Reply To: | [log in to unmask][log in to unmask], 17 Oct 2002 18:01:34 -0500431_- Johnson, Tracy ( [log in to unmask]) wrote: : Thanks, this seems to be what I need. : If VMS booted, you may need to reset the SYSTEM account's password. The procedure for performing that is in the VMS FAQ: http://www.openvms.compaq.com/wizard/faq/vmsfaq.txt 5.5 I've forgotten the SYSTEM password - what can I do? The SYSTEM account is equivalent to the root account of a unix system. [...]50_17Oct200218:01: [log in to unmask] |
Date: | Thu, 17 Oct 2002 16:55:36 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Ok, DUMB questions, but it happened to me...is the SCSI terminator in place on the back?
Rich Trapp < mailto:[log in to unmask] <mailto:[log in to unmask]> >
Consulting for Agilent Technologies, Loveland, Colorado.
Managed Business Solutions < http://www.thinkmbs.com/ <http://www.thinkmbs.com/> >
200 South College Avenue
Fort Collins, Colorado 80524-2811
970.679.2221 (voice)
970.669.3071 (fax)
-----Original Message-----
From: Simpkins, Terry [mailto:[log in to unmask]]
Sent: Thursday, October 17, 2002 4:41 PM
To: [log in to unmask]
Subject: Re: boot failure - part #2
Several suggestions, all proved fruitless.
I have double checked all cables, made sure the SLT in the tape drive was "on line" before needed and even replaced the processor board. No change.
After responding to the "boot from primary path" and "interact with IPL" questions, I get the "Booting..."
message and then the errors listed below.
I was hoping someone could shed some light on the source/cause of the status messages.
-----Original Message-----
From: Simpkins, Terry
Sent: Thu 10/17/2002 1:00 PM
To: hp3000-l
Cc:
Subject: boot failure
I'm working at home this week trying to get my 927LX back up and running and it won't boot.
I have tried booting from both the primary and alternate paths with the same result.
Booting ...
Entry_Test Status = 0
Failed to Initialize
Entry_Init Status = -4
0B300040 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000340 0000FF00 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Anyone able to shed some light on this? I have a spare processor board, should I install it?
Please post any replies to my home email account, since that is where I am this week.
[log in to unmask]
Nwyly᧪܅܆+ޱZᯞlztb eyᥫ+"mj秺vb࠽?ƝIa
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|