I have bad news for you.
You scratched your volumes.
You need to build the volume sets.Build mirrors after this step.
Restore the directory
restore the files
-Craig
From: Dan Barnes <[log in to unmask]>
To: Craig Lalley <[log in to unmask]>
Cc: "[log in to unmask]" <[log in to unmask]>
Sent: Saturday, December 17, 2016 12:20 PM
Subject: RE: Disk Rebuild Issue
LOL... there's a duh ! ;-)
Fun new issue though. I have gotten the drives cleaned up by doing in install to each of the 4 problem devices to rewrite the volume label (Thanks Ralph Bagen !) , then I was able to reboot and scratch the volumes out.
Now me new fun is:
volutil: :dstat all
LDEV-TYPE STATUS VOLUME VOLUME SET - GEN
---------- ------- ----------------------------------
1-C2300WDR1 MASTER MEMBER1 MPEXL_SYSTEM_VOLUME_SET-0
2-C2300WDR1 MEMBER MEMBER2 MPEXL_SYSTEM_VOLUME_SET-0
3-C2300WDR1 MEMBER MEMBER3 MPEXL_SYSTEM_VOLUME_SET-0
4-C2300WDR1 MEMBER MEMBER4 MPEXL_SYSTEM_VOLUME_SET-0
30-ST34371W SCRATCH
31-ST34371W SCRATCH
32-ST34371W SCRATCH
33-ST34371W SCRATCH
34-ST34572WC SCRATCH
35-ST34573WC SCRATCH
36-ST34573WC SCRATCH
40-ST34572WC MASTER MEMBER1 DISKDUMP-0
70-ST34371W SCRATCH
71-ST34572WC SCRATCH
72-ST34572WC SCRATCH
73-ST34572WC SCRATCH
74-ST34573WC SCRATCH
75-ST34371W SCRATCH
76-ST34573WC SCRATCH
80-ST34572WC MEMBER MEMBER2 DISKDUMP-0
volutil: newmirrset user_volume_set member1 (30,70) 100 0
^
*Error: This comamnd has no associated functionality. (shell 9)
volutil:
Thanks!
Dan
Dan Barnes
Sr. Systems Engineer
Phone: 763.390.8320
Fax: 763.425.5483
Cell: 612.240.2136
Email: [log in to unmask]
Visit us at:
-----Original Message-----
From: Craig Lalley [mailto:[log in to unmask]]
Sent: Saturday, December 17, 2016 8:38 AM
To: Dan Barnes <[log in to unmask]>
Cc: [log in to unmask]
Subject: Re: Disk Rebuild Issue
dsec does not modify, it displays?.
I guess msec, and I would do the first 256 bytes.
-Craig "its early"
Sent from my iPad
> On Dec 16, 2016, at 1:34 PM, Dan Barnes <[log in to unmask]> wrote:
>
> Hi All,
>
> We have a system (S979/200 7.0 pp2) that had a diskc go bad and cause quite a bit of corruption.
>
> Pages & pages of these error messages for a ton of files:
>
> File label virtual address of corrupted file is $00000085.$000DD700.
> *WARNING: FILE LABEL CORRUPTION DETECTED FOR: M299BKUP.RESTOR7.NSD (153,-86)
>
> Being a Time & Materials box, I am opting to just rebuild the volumes and restore data.
>
> As you can see below, I have failed to get 4 of the volumes to cleanly comply with my requests.
>
> I have tried the suggested Debug dsec command as shown below:
>
> :debug
> HPDEBUG Intrinsic at: a.00fc1fc0 hxdebug+$e8
> $4 ($3f) nmdebug > dsec #35.0,8,a
> SEC $23.0 ASCII T.IT _UV .... ....
> SEC $23.10 ASCII .... .... .... ....
> $5 ($3f) nmdebug > dsec #36.0,8,a
> SEC $24.0 ASCII T.IT _UV .... ....
> SEC $24.10 ASCII .... .... .... ....
> $6 ($3f) nmdebug > dsec #70.0,8,a
> SEC $46.0 ASCII T.US ER_V .... ....
> SEC $46.10 ASCII .... .... .... ....
> $7 ($3f) nmdebug > dsec #71.0,8,a
> SEC $47.0 ASCII T.US ER_V .... ....
> SEC $47.10 ASCII .... .... .... ....
> $8 ($3f) nmdebug >
>
>
> but after rebooting the system, have found things in the very same state.
>
> :dstat all
> LDEV-TYPE STATUS VOLUME VOLUME SET - GEN
> ---------- ------- ----------------------------------
> 1-C2300WDR1 MASTER MEMBER1 MPEXL_SYSTEM_VOLUME_SET-0
> 2-C2300WDR1 MEMBER MEMBER2 MPEXL_SYSTEM_VOLUME_SET-0
> 3-C2300WDR1 MEMBER MEMBER3 MPEXL_SYSTEM_VOLUME_SET-0
> 4-C2300WDR1 MEMBER MEMBER4 MPEXL_SYSTEM_VOLUME_SET-0
> 30-ST34371W SCRATCH
> 31-ST34371W SCRATCH
> 32-ST34371W SCRATCH
> 33-ST34371W SCRATCH
> 34-ST34572WC SCRATCH
> 35-ST34573WC *PENDING-MD MEMBER1 IT_UV-0
> 36-ST34573WC *PENDING-MD MEMBER2 IT_UV-0
> 40-ST34572WC MASTER MEMBER1 DISKDUMP-0
> 70-ST34371W *PENDING-MD MEMBER1 USER_VOLUME_SET-0
> 71-ST34572WC *PENDING-MD MEMBER2 USER_VOLUME_SET-0
> 72-ST34572WC SCRATCH
> 73-ST34572WC SCRATCH
> 74-ST34573WC SCRATCH
> 75-ST34371W SCRATCH
> 76-ST34573WC SCRATCH
> 80-ST34572WC MEMBER MEMBER2 DISKDUMP-0
> :
>
> Is there something I am not doing in Debug to make the change stick ?
>
> Any other ideas would be greatly appreciated.
>
> Thanks!
> Dan Barnes
>
> Dan Barnes
> Sr. Systems Engineer
> Phone: 763.390.8320
> Fax: 763.425.5483
> Cell: 612.240.2136
> Email: [log in to unmask]<mailto:[log in to unmask]>
>
> [Logo & address 12]<http://www.lci-online.com/>
> Visit us at: [FB icon] <https://www.facebook.com/lcionline> [LI icon] <https://www.linkedin.com/company/lci-lawinger-consulting-inc.>
>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
