Hi.
Thanks very much for all tip, I will try this as soon as possible.
I let you know the result.
Greetings
Mats Nyberg
Systemkonsult
Direkt: +46 31 744 51 37
[log in to unmask]
-----Original Message-----
From: Gilles Schipper [mailto:[log in to unmask]]
Sent: den 8 augusti 2012 15:33
To: Nyberg Mats
Cc: [log in to unmask]
Subject: Re: [HP3000-L] Recovery on Private volume group
There was no need to manually re-create the accounts after the INSTALL and that is perhaps why things went wrong.
After purging those accounts you need to restore the directory as previously shown - and follow with your files restore.
After restoring the directory, you can check that all user volume accounts and groups are correctly homed to their appropriate volume sets by issuing:
:report @.@;onvs=uservolumesetname
Gilles Schipper
Sent via mobile
416-702-7900
On 2012-08-08, at 3:35 AM, Nyberg Mats <[log in to unmask]> wrote:
> Hi.
>
> This is exactly what I did, but I can't see any data at all on the private_volumeset after the restore was succeeded.
>
> I was also created the accounts, before the restore. Maybe this is the reason why the data not goes to the right place.
>
> I will delete the accounts, and try again.
>
> Thanks
>
>
> Best regards
>
>
> Mats Nyberg
> Systemkonsult
>
>
>
>
> Direkt: +46 31 744 51 37
>
>
> [log in to unmask]
>
> -----Original Message-----
> From: Gilles Schipper [mailto:[log in to unmask]]
> Sent: den 8 augusti 2012 03:08
> To: Nyberg Mats; [log in to unmask]
> Subject: Re: [HP3000-L] Recovery on Private volume group
>
> The easiest way to re-create the User Volume-set directory is to simply restore it from your backup - assuming it was stored there in the firt place.
>
> Following your "INSTALL" - and after using VOLUTIL to re-create your User volumeset disc environment, you simply need to:
>
> :file t;dev=tape
> :restore *t;;directory
>
> After that, the subsequent restore should restore all groups and files to their proper location.
>
> You don't need to go through the un-reliable BULDACCT process - unless you failed to backup all appropriate directories on your backup.
>
>
>
> At 07:34 AM 2012-08-07, Nyberg Mats wrote:
>> Oj, en till:)
>>
>> Thanks' for very fast response,
>>
>> I will coming back with the STORE and RESTORE command, with all options.
>>
>> The restore was succeeded but it seems that the data is restored to
>> MPEIX_SYSTEM_VOLUME_SET.
>>
>> Best regards
>>
>>
>>
>> [cid:image001.gif@01CD74A1.51500DD0]
>>
>> Mats Nyberg
>> Systemkonsult
>>
>> Direkt: +46 31 744 51 37
>> [log in to unmask]<mailto:[log in to unmask]>
>>
>> From: Per Östberg [mailto:[log in to unmask]]
>> Sent: den 7 augusti 2012 13:11
>> To: Nyberg Mats
>> Cc: [log in to unmask]
>> Subject: Re: [HP3000-L] Recovery on Private volume group
>>
>> (Oj, en svensk!)
>> Greetings
>>
>> how did you create the accounts?
>> what's your :RESTORE command (and what was the :STORE command)?
>> any errors?
>> does "no data goes to the private volume set"
>> mean that it's not being restored or that it ends up in the SYSTEM_VOLUME_SET?
>>
>> It's been too long since I've done anything on a 3k, but iirc,
>> accounts (and groups) should be created wiht an ;ONVS argument. Maybe
>> there is an ;ONVS arg for :RESTORE (as there is for :STORE)?
>>
>> I trust you'll get more informed answers as soon as they start to
>> wake up on the other side of the Atlantic.
>>
>> regards
>> /per
>>
>> 2012/8/7 Nyberg Mats
>> <[log in to unmask]<mailto:[log in to unmask]>>
>> Hi everyone
>>
>>
>> I wonder if anybody knows how to do a recovery on private volume set?
>>
>> The scenario is: A new disk storage system Have a complete backup
>> from the old disk storage system, and a SLT tape as well.
>> I have create the accounts on the new disk storage system, also add
>> the private volume with the volutil When trying to do a restore, no
>> data goes to the private volume set
>>
>> ...
>> --
>> \---------------------------------------------------
>> \ Per Östberg \ [log in to unmask]<mailto:[log in to unmask]>
>> |Stambanev 33, 141 43 Huddinge
>> / 08-7110778 / 070-0017627
>> /---------------------------------------------------
>>
>> * To join/leave the list, search archives, change list settings, *
>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> ----------------------------------------------------------------------
> ---------------------------
> Gilles Schipper
> GSA Inc.
> HP System Administration Specialists
> 300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
> Tel: 416.702.7900
> email: [log in to unmask] web: http://www.gsainc.com
> ----------------------------------------------------------------------
> ---------------------------
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
