Did you try adding an "[Esc]E" at start of each of your setup files ?

--
==================================================
Denis St-Amand (Remove "removeit." from email address)
==================================================
"Art Bahrs" <[log in to unmask]> wrote in message
news:ae2tud013j1@enews4.newsguy.com...
> Hi All :)
>    Ok... dumb question time...
>
>    Given an HP LJ 4100N with the NPCONFIG.PUB.SYS settings as shown
> below...and the following commands at the colon and blue paper loaded in
> tray 1 (hand fed or envelope tray) and white paper loaded in the main
> tray
>
> :file test4000;dev=4000,8,1
> :file test4007;dev=4007,8,1
> :listf [log in to unmask];*test4000
> :listf [log in to unmask];*test4007
> :listf [log in to unmask];*test4000
>
> I expect all the [log in to unmask] files to be listed on white paper and the
> [log in to unmask] files to be listed on blue paper and the [log in to unmask] files to
> be listed on blue paper...
>
> But instead I get White, Blue, Blue...
>
> The printer is not "returning" to default printing using the lower
> tray...
>
> My NPCONFIG entries seem to be right...
>
> Anyone see anything that is biting me here?  I would swear I had this
> working before... but we all know about my memory! Hehe
>
> Thanks,
> Art "if I had another paper tray I could do red, white and blue" Bahrs
>
>
>    93     global (banner_header = FALSE        # No header
>    94             banner_trailer = FALSE       # No trailer
>    95             data_intray = 4              # Lower tray for printout
>    96             pjl_supported = TRUE         # Full PJL devices
>    97             jam_recovery = TRUE)         # Reprt jam paper by
> itself
>    98
>   590     4000    (network_address =  10.10.0.36     # Printer at Info
> Sys
>   591               banner_intray = 4
>   592               data_intry = 4
>   593               setup_file = OFSTDtst.HPENV.SYS) # Standard Print
> Mode
>   594                                                # Device Class: ISP
>   595
>   596     4001    (network_address =  10.10.0.36     # Printer at Info
> Sys
>   597               setup_file = PCLLP.HPENV.SYS)    # Greenbar
> (Landscape)
>   598                                                # Device Class:
> ISPG
>   599
>   600     4002    (network_address =  10.10.0.36     # Printer at Info
> Sys
>   601               setup_file = SCHED17P.HPENV.SYS) # Schedule Env Mode
>   602                                                # Device Class:
> ISPS
>   603
>   604     4003    (network_address =  10.10.0.36     # Printer at Info
> Sys
>   605               setup_file = LP88.HPENV.SYS)     # Compressed Mode
>   606                                                # Device Class:
> ISPC
>   607
>   608     4007   (network_address = 10.10.0.36       # IS laser for
> testing.
>   609             banner_intray = 2                  # tray for banner
>   610             data_intray = 2                    # Hand feed Tray
>   611             setup_file = STDLABEL.HPENV.SYS)   # std label env.
> file
>   612
> /L OFSTDTST.HPENV.SYS
>      1      &l7D
>      2      &l0O
>      3      &l2E
>      4      &a1L
>      5      (s0p16.25h0s0b4099T
>      6      &l4H
>  / L OF  STDLABEL.HPENV.SYS
>      1      &l6D
>      2      &l0O
>      3      &l3E
>      4      &l66F
>      5      &a0L
>      6      (s0p10h0s0b4099T
>      7      &l2H
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *