Yes you can Larry however there are a few things to keep in mind...
1) The disk drives must be of the same size otherwise the larger of the
drive will only be as big in capacity as the smaller drive
2) HP recommends that the firmware be identical on the partner drive. This
is only a recommendation as it will work if not same.
3) The master drive should be assigned the higher priority SCSI id. The
polling priority is 7,6,5,4,3,2.....
4) You cannot mirror the system volume set
As for the cost, check with your local HP VAR.
HTH
> -----Original Message-----
> From: Simonsen, Larry [mailto:[log in to unmask]]
> Sent: Wednesday, February 20, 2002 11:40 AM
> To: [log in to unmask]
> Subject: [HP3000-L] mirroring
>
>
> Can mirroring be done without hot swap disc drives?
> Must the drive be the same size, I have a 9 gb drive and would like to
> mirror it do I need to buy a 9 gb or can I go with a 18 gb
> drive and only
> use 9 gb?
> What is the cost for any mirror software?
>
> -------------------------------------------------
> Larry Simonsen Phone: 801-437-3737
> Flowserve Corporation Fax: 801-491-1750
> 505 E. Technology Ave http://www.Flowserve.com
> Bldg. C, Suite 3100 e-mail: [log in to unmask]
> Orem, UT 84097
> -------------------------------------------------
> All opinions expressed herein are my own and reflect, in no
> way, those of my
> employer.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|