 
| Subject: | |
| From: | |
| Reply To: | |
| Date: | Fri, 31 Oct 1997 08:10:00 -0400 |
| Content-Type: | Text/Plain |
| Parts/Attachments: |
|
|
Hi gang -
I am having a problem with getting information out of nettool similar to
the netstat command on unix. On this system, I have three Internet
gateway's configured. Two are to specific networks and the third includes
some specific networks as well as the default network. The nmmgr entry
for the last one is:
--------------------------------------------------------------
NMMGR/3000 (B.06.00) #158 Neighbor Gateway Reachable Networks
Data: Y
When Data Flag is "N", press "Save Data" to create the data record.
Command:
Path: NETXPORT.NI.LAN1.INTERNET.IP163
[C 192.023.001 163] Neighbor Gateway IP Internet Address
Configured Reachable Networks
IP Network Address IP Mask (Optional) Hops
[B 172.016 001.000] [255.255.255.000] [1 ]
[B 172.016 002.000] [255.255.255.000] [1 ]
[B 172.016 008.000] [255.255.255.000] [3 ]
[B 172.016 006.000] [255.255.255.000] [3 ]
[B 172.016 004.000] [255.255.255.000] [3 ]
[B 172.016 011.000] [255.255.255.000] [1 ]
[B 172.016 012.000] [255.255.255.000] [1 ]
[@ ] [ ] [1 ]
[ ] [ ] [ ]
[ ] [ ] [ ]
File: NMCONFIG.PUB.SYS PAGE 1
--------------------------------------------------------------
The problem in nettool is that the [name][route][route] command shows all
of the redirects to our firewall. Also, it only shows 50 entries. I then
say, ok let me just list the entries for this gateway (192.23.1.163). I
get no entries shown. The the fact that there are 50 entires in the
table. Are there anyway to show more entries. The entries must be out
there, or the "data" won't route.
I have a call into HP regarding showing the default route like the netstat
command, but have gotten little help. That is why I am turning to the
list. James H. from HP - Does this ring any bells?
Thanks a lot
/alan
[log in to unmask]
==================nettool output below=======================
:nettool.net
NETTOOL Version: B0509000
Enter HELP HELP for an explanation of the help facility.
Enter HELP OPERATION for guidance on NETTOOL use.
Commands can be abbreviated, HELP keywords cannot.
Menu-specific commands for the ROOT:
RESOURCE CONFIG NAMEADDR PING STATUS NMDUMP
X25STAT X25CHECK IPCINT XPVAL XPPERF QVALNS
NSTEST LOOPINIT NSLOGON SOCKINFO filters
[1]>>>name
CACHE MAPPINGS ROUTING PATH filters
[2]NAMEADDR>>>rout
ROUTING DELROUTING TOTALS filters
networkfilter gatewayfilter
[3]NAMEADDR.ROUTING>>>rout
Network address filter: @
Gateway address filter: @
Network number Subnet mask Gateway Hops Flags
______________________________________________________________
38.241.117.0 255.255.255.0 192.23.1.253 200 2
128.8.10.0 255.255.255.0 192.23.1.253 200 2
128.8.170.0 255.255.255.0 192.23.1.253 200 2
128.118.30.0 255.255.255.0 192.23.1.253 200 2
128.173.16.0 255.255.255.0 192.23.1.253 200 2
128.183.7.0 255.255.255.0 192.23.1.253 200 2
[snip entries...there are a total of 50 entries listed]
143.172.1.0 255.255.255.0 192.23.1.253 200 2
143.233.245.0 255.255.255.0 192.23.1.253 200 2
144.81.97.0 255.255.255.0 192.23.1.253 200 2
______________________________________________________________
Total number of routings = 50
[4]NAMEADDR.ROUTING>>>gate
Gateway IP address:192.23.1.163
[6]NAMEADDR.ROUTING>>>rout
Network address filter: @
Gateway address filter: 192.23.1.163
Network number Subnet mask Gateway Hops Flags
______________________________________________________________
______________________________________________________________
Total number of routings = 50
[7]NAMEADDR.ROUTING>>>
------------------------------------------------------------
|
|
|
