I know where to go to set it up, and I have a similar configuration to what you provided, but I can't seem to be able to see the second network. When I try to ping it, I get "Destination Node does not exist: error #4"
Here is a copy of what is in NMMGR.
NMMGR/3000 (B.06.00) #158 Neighbor Gateway Reachable Networks Data: Y
When Data Flag is "N", press "Save Data" to create the data record.
Command:
Path: NETXPORT.NI.LAN.INTERNET.GATEWAY
[B 172.016 005.003] Neighbor Gateway IP Internet Address
Configured Reachable Networks
IP Network Address IP Mask (Optional) Hops
[B 172.016 004.002] [255.255.255.000] [2 ]
[@ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
File: NMCONFIG.PUB.SYS PAGE 1
Next Prev First Last Condense Save Help Prior
Page Page Page Page Page Data Screen
>>> "Proudfoot, Bill" <[log in to unmask]> 04/26/01 03:15AM >>>
See the following example :-
NMMGR/3000 (B.06.00) #158 Neighbor Gateway Reachable Networks
Data: Y
Enter data and press SAVE DATA. Press NEXT SCREEN to continue.
Command:
Path: NETXPORT.NI.LAN1.INTERNET.GATEWAY
[A 010 097.016.037] Neighbor Gateway IP Internet Address
Configured Reachable Networks
IP Network Address IP Mask (Optional) Hops
[@ ] [255.255.240.000] [1 ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ]
File: NMCONFIG.PUB.SYS PAGE 1
Next Prev First Last Condense Save Help
Next
Page Page Page Page Page Data
Screen
Bill
> * +44 (0)151-235-3055
Fax: +44 (0)151-235-3151
> * mailto:[log in to unmask]
>
>
-----Original Message-----
From: Donald Frantum [mailto:[log in to unmask]]
Sent: 25 April 2001 20:42
To: [log in to unmask]
Subject: Re: [HP3000-L] How to set Default GATEWAY.
I'm a little confused. Do I add the "@" sign in place of A,B,C,D and then
the I.P. address or just "@" and the system uses my Neighbor gateway as my
default gateway. What we have presently is two networks that need to
connect to the HP3000. I can ping the one that is assigned to my neighbor
gateway with no problem, but when I try to ping the other, the HP3000
doesn't even see it. I have never been at a shop with two separate
networks, so I have never faced this before.
TIA
Donald
>>> Fred Metcalf <[log in to unmask]> 04/25/01 12:39AM >>>
Hi,
On screen #158 in NMMGR: Neighbor Gateway Reachable Networks
(Path: NETXPORT.NI.SQUHNET.INTERNET.HPRS in your case)
Press the 'Help' key (F7) and read this:
IP network address
List the IP addresses of all the networks that you
will be able to reach through the gateway you are
configuring. You also use this field to indicate
whether or not the gateway is to serve as a default
gateway by entering an at sign (@) to specify that
it is a default gateway.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
***********************************************************************
Confidentiality: This e-mail and its attachments are intended for the
above named recipient(s) only and may be confidential and/or
privileged. If they have come to you in error you must take no action
based on them, nor must you copy or disclose them or any part of their
contents to any person or organisation; please reply to this e-mail
and highlight the error immediately and delete this e-mail and its
attachments from your computer system.
Security Warning: Please note that this e-mail has been created in the
knowledge that Internet e-mail is not a 100% secure communications
medium. We advise that you understand and observe this lack of
security when e-mailing us.
Viruses: Although we have taken steps to ensure that this e-mail and
its attachments are free from any virus, we advise that in keeping
with good computing practice the recipient should ensure they are
actually virus free
***********************************************************************
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
