Subject: | |
From: | |
Reply To: | |
Date: | Fri, 16 Nov 2001 22:46:13 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You don't say what release your on so I'll assume 6.5 or 7.0. The
following is from SYSGEN on a 6.0 (but will serve fine for 6.5) and a
7.0 box for pseudo-LP ldev. I can send similar info from a 997 if you
need it.
You MUST have a system printer defined that is NOT a network printer.
When you are applying patches & updates you'll have to start spooling
for some of the patch processes to complete properly (they run as jobs
and need to spool the $stdlist output). LDEV 6 has been the standard
LDEV for the system line printer for a couple of decades (gee, longer
than Windows has existed, huh?).
For check lists on adding hardware you should have info that came with
the card (an installation manual) and also the system software
maintenance guide should be in reach as well.
6.0/6.5 (change the path specifications for your box) on a 969:
io>LP
PATH: 10/4 LDEV:
ID: A2372-60003 TYPE: BC
PMGR: BUS_CONV_MGR PMGRPRI: 2
LMGR: MAXIOS: 0
PATH: 10/4/20 LDEV:
ID: A2372-60003-SCSI TYPE: DA
PMGR: SCSI_DAM PMGRPRI: 6
LMGR: MAXIOS: 0
PATH: 10/4/20.8 LDEV:
ID: PSEUDO TYPE: DA
PMGR: TRANSPARENT_MGR PMGRPRI: 6
LMGR: MAXIOS: 0
PATH: 10/4/20.8.0 LDEV: 6
ID: HP2567B TYPE: LP
PMGR: SCSI_DISC_DM PMGRPRI: 10
LMGR: LOGICAL_DEVICE_MANAGER MAXIOS: 0
io>LD 6
LDEV: 6 DEVNAME: OUTDEV: 0 MODE:
ID: HP2567B RSIZE: 66 DEVTYPE: LP
PATH: 10/4/20.8.0 MPETYPE: 32
MPESUBTYPE: 9
CLASS: LP LP1
--------------------
7.0, RELEASE: C.70.01 on A400 box:
io> LP
PATH: 0 LDEV:
ID: PAT_IOA_BC TYPE: BC
PMGR: PCI_IKE_MGR PMGRPRI: 2
LMGR: MAXIOS: 0
PATH: 0/0 LDEV:
ID: PAT_PCI_BC TYPE: BC
PMGR: PCI_ELROY_MGR PMGRPRI: 2
LMGR: MAXIOS: 0
PATH: 0/0/2 LDEV:
ID: PCI_DEVICE TYPE: BC
PMGR: PCI_DEVICE_MGR PMGRPRI: 2
LMGR: MAXIOS: 0
PATH: 0/0/2/0 LDEV:
ID: A5150A TYPE: DA
PMGR: PCI_SCSI_DAM PMGRPRI: 6
LMGR: MAXIOS: 0
PATH: 0/0/2/0.16 LDEV:
ID: PSEUDO TYPE: DA
PMGR: TRANSPARENT_MGR PMGRPRI: 6
LMGR: MAXIOS: 0
PATH: 0/0/2/0.16.0 LDEV: 6
ID: LP_PP_ID TYPE: PP
PMGR: SCSI_DISC_DM PMGRPRI: 10
LMGR: LOGICAL_DEVICE_MANAGER MAXIOS: 0
io> LD 6
LDEV: 6 DEVNAME: OUTDEV: 0 MODE:
ID: LP_PP_ID RSIZE: 66 DEVTYPE:
PP
PATH: 0/0/2/0.16.0 MPETYPE: 32
MPESUBTYPE: 6
CLASS: LP PP ADMINLP FTPLP
David Knispel wrote:
>
> To the list,
>
> I'm removing the HP-IB card from my system this weekend. This will remove
> one occurence of LP. One of my network printers is also called LP (ldev71).
>
> Is this going to be a problem that the only definition of LP is a network
> printer that isn't there at startup?
>
> I also plan on added a FW card in the slot where the HP-IB card was. Any
> check lists out there for adding hardware to the HP3000?
>
> David Knispel
> [log in to unmask]
> Phone: 513-248-5029
> Fax: 513-248-2672
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|