In <C25CD4CC@MHS>, [log in to unmask] writes:
>
>Can anyone help with printing from Espul to HP JetDirect EX Plus3
>external print server. We are trying to print from Espul's ASP using
>the following:-
>
>0194 * Setup to print to WA ldev 630
>0195 *
>0196 NETPRINT DEV=630 AND P>7
>0197   NODE=172.19.138.60
>0198   OPTIONS DEST="RAW1";PTYPE=LPD;PURGE
>0199   NETLOG
>0200 END
>
>The resulting error is as follows:-
>
>(01142-1841) NetPrint svr  943: error 1205, DESTINATION NAME (DEVICE)
>REJECTED BY TARGET NODE  (1205)
>
>We have 2 printers attached to the JetDirect box. We have tried
>PTYPE=JD, however this sends all reports for both ports to Port 1.
>
>Is there a PORT option we can specify for the 2nd & 3rd ports?
>
>Any other advice would be helpful!
>
>Wayne Laughton
>[log in to unmask]
 
Below is our config for Minisoft's network spooler. I am fairly sure it is a
version of ESPUL's since I got the answer on configuring Minisoft's porduct
from RAC consulting.
 
PLASER is on port 1 of a Jet Direct EX 3 box and PCOLOR is on port 2
Also note the NOFF option which will get rid of blank pages that come out
when using the printer with Resource Sharing and most PC based software.
 
Hope this helps;
 
*
* This is a sample NETPRINT/92 Configuration file
*
 
RESCAN=FINISH
 
INTERVAL=10
LOGDETAIL=HIGH
 
*
* This file causes NETPRINT/92 to wake every 10 seconds and print
* spoolfiles on device DEVCLASS to network printer PRINTER until
* all files are printed. Then it goes back to sleep. Each file
* that is printed has the banner attached.
*
 
NETPRINT D=PLASER
  NODE 192.2.2.205
  NOSHAREDRIVER
  OPTIONS PURGE;RESET;NOFF
  NETLOG
END
 
NETPRINT D=PHP4V
  NODE 192.2.2.4
  NOSHAREDRIVER
  OPTIONS PURGE;RESET;NOFF
  NETLOG
END
 
NETPRINT D=PCOLOR
  NODE 192.2.2.205
  NOSHAREDRIVER
  OPTIONS PTYPE=JD;PORT=9101;PURGE;RESET;NOFF
  NETLOG
END
 
 
Bill Grefe ([log in to unmask])
PCI Ozone & Control Systems, Inc.
phone  201-575-7052   fax  201-575-8941
See us at www.pci-ozone.com