Yep, SCSI from processor to bridge, fiber from bridge to brocade switch,
fiber from switch to VA.

We brought system up in single disk mode and looking at sysgen. All ldevs
are there.
On Apr 1, 2015 4:02 PM, "Jim Maher" <[log in to unmask]> wrote:

> You should have a SCSI bridge. It’s a small box that converts SCSI to
> fiber.
>
>
>
> *From:* Wes S [mailto:[log in to unmask]]
> *Sent:* Wednesday, April 01, 2015 1:59 PM
> *To:* Jim Maher
> *Cc:* [log in to unmask]
> *Subject:* RE: [HP3000-L] system abort
>
>
>
> A6188A - 7100
>
> On Apr 1, 2015 3:56 PM, "Jim Maher" <[log in to unmask]> wrote:
>
> You said you are using a va array on a 969. What model? Also are you using
> a SCSI/fc bridge?
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
> Behalf Of Wes S
> Sent: Wednesday, April 01, 2015 1:51 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] system abort
>
> VA is in ready state. We have power cycled all the hardware, had to bring
> it up in a particular order. Tried booting 5 or 6 times now and crashes
> when it gets to aggregate recovery of private  volume set.
>  On Apr 1, 2015 3:48 PM, "Ryan C. Melander" <[log in to unmask]> wrote:
>
> >  VA's can be finicky, I would reboot VA. Before reloading anything. Is
> > the VA in a ready state?  Anything showing in the VA logs?
> >
> >
> >  Sent from my Verizon Wireless 4G LTE smartphone
> >
> >
> > -------- Original message --------
> > From: Wes S <[log in to unmask]>
> > Date: 04/01/2015 1:44 PM (GMT-08:00)
> > To: [log in to unmask]
> > Subject: Re: [HP3000-L] system abort
> >
> >  Mapper shows all devices are there. We did that a while ago...:)  On
> > Apr 1, 2015 3:42 PM, "Mark Ranft" <[log in to unmask]> wrote:
> >
> > > The first thing I would do is BO PRI and instead of START
> > > NORECOVERY.  I would run ODE MAPPER.  (Note:  This is MAPPER2 on newer
> system).
> > >
> > > Hint:  At ISL> prompt type 'RUN ODE MAPPER'
> > >
> > > Verify you can see all the disks you think you should see.
> > >
> > > Mark Ranft
> > > Pro 3K
> > >
> > >
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *