Pete,
Try using the CAT.HPBIN.SYS on the spoolfile to FILEX and then FTP'ing that
file. This should work as follows:
cat.hpbin.sys o63.out.hpspool > filex
save filex
...ftp commands to send filex
Tony Gil
Programmer Analyst
20th Century Plastics
205 South Puente Street
Brea, CA. 92821
voice: (714) 441-4500 ext. 2357
fax: (714) 441-4536
email: [log in to unmask]
> -----Original Message-----
> From: Pete Vickers [SMTP:[log in to unmask]]
> Sent: Wednesday, September 29, 1999 10:42 AM
> To: [log in to unmask]
> Subject: FTP and Spoolfiles
>
> Hi,
> I am attempting to use ftp to copy spool files. Below is a test and the
> results.
> The file copies ok, but I cannot then use Spoolf a.b.c;print, as you see
> from the results.
> I have tried as many options as I can think of in the command, e.g. cctl
> etc, but I cannot seem to
> get the results I want.
>
> Anyone any ideas
>
> Thanks
>
> Pete
>
> Output from test--------------->
>
> :file a;dev=lp,1,1
> :listf @.@,2>*a
> :ftp hpserver
> File Transfer Protocol [A0008T34] (C) Hewlett-Packard Co. 1990
> 220 HP ARPA FTP Server [A0008T31] (C) Hewlett-Packard Co. 1990
> Name(mgr): mgr.minisoft
> 230 User logged on
> Remote system type is MPE/iX.
> ftp> :showout
>
> DEV/CL DFID JOBNUM FNAME STATE FRM SPACE RANK PRI #C
> LP #O1186251 #S7584 A READY 48 D 1 1
> 63 #O63 #S7584 $STDLIST OPENED
>
> 2 FILES:
> 0 ACTIVE
> 1 READY; INCLUDING 1 SPOOFLES, 1 DEFERRED
> 1 OPENED; INCLUDING 0 SPOOFLES
> 0 LOCKED; INCLUDING 0 SPOOFLES
> 1 SPOOFLES: 48 SECTORS
> OUTFENCE = 1
> put o1186251.out.hpspool savesp;rec=-1008,1,v,ascii;code=outsp;spool
> 200 PORT command ok.
> 150 File: savesp;REC=-1008,1,V,ASCII;CODE=OUTSP;SPOOL;DISC=147,8 opened;
> data connection will be opened
> 226 Transfer complete.
> 10102 bytes sent in 0.00 seconds (9865.23 Kbytes/sec)
> ftp> :listf save@,2cv
> ACCOUNT= MINISOFT GROUP= MM
>
> FILENAME CODE ------------LOGICAL RECORD----------- ----SPACE----
> SIZE TYP EOF LIMIT R/B SECTORS #X MX
>
> SAVESP 128W VB 147 204800 1 48 1 8
>
>
> ftp> put o1186251.out.hpspool savesp;rec=-1008,1,v,ascii;cctl;code=outsp
> 200 PORT command ok.
> 150 File: savesp;REC=-1008,1,V,ASCII;CCTL;CODE=OUTSP;DISC=147,8 opened;
> data con
>
> nection will be opened
> 226 Transfer complete.
> 10102 bytes sent in 0.00 seconds (4932.62 Kbytes/sec)
> ftp> :listf save@,2
> ACCOUNT= MINISOFT GROUP= MM
>
> FILENAME CODE ------------LOGICAL RECORD----------- ----SPACE----
> SIZE TYP EOF LIMIT R/B SECTORS #X MX
>
> SAVESP OUTSP 1010B VA 147 147 1 48 1 8
>
>
> ftp> quit
> 221 Server is closing command connection
> :spoolf savesp.mm.minisoft;print
> File "SAVESP.." is not outsp file type, not printed. (CIWARN 4694)
> ^
> No qualified file for SPOOLF ;PRINT. (CIWARN 4808)
> :
>
> USER: #S7584,MGR.MINISOFT,MM (NOT IN BREAK)
> RELEASE: C.55.00 MPE/iX HP31900 C.05.08 USER VERSION: C.55.00
> CURRENT: WED, SEP 29, 1999, 4:23 PM
> LOGON: WED, SEP 29, 1999, 3:15 PM
> CPU SECONDS: 12 CONNECT MINUTES: 68
> $STDIN LDEV: 63 $STDLIST LDEV: 63
> :
>
>
> --
> Pete Vickers
> Phone: (44) 1204 657497
> Fax: (44) 1204 450927
> Mobile: (44) 860 907493
> www.petevick.demon.co.uk
|