Hi @,

Is this also possible when on 5.5?

Does anybody have any experience with this?
Do we need a patch?


Kind regards,

Eric Jansen
> -----Original Message-----
> From: Stoney Ratliff [mailto:[log in to unmask]]
> Sent: Wednesday, February 14, 2001 4:46 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] Printing from multiple hosts
>
>
> ++++++++++++++++++Original post+++++++++++++++++++++++++++++++++
> I am using host based DTC manager on a 979, 6.0 pp2. Can I
> also print from a
> UNIX system, 10.2, to the same printers. If this can be done how do I
> accomplish this.
>
> TIA
>
> Al
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ===================Response====================
> You will need to set up ddfa on the HP-UX 10.20 for the DTC.
> Do a HP-UX man ddfa and get help information.
> The two key files are dp and pcf. Man points to examples.
> That will create ocd daemons for the DTC ports.
> Here is a example from a working HP-UX and HP3K printing to
> same  printer on DTC. You will need to make sure that the DTC
> configuration allows multiple hosts printing to the port.
> Below are the HP-UX 10.20 files that will work.
>
>
> # more /etc/ddfa/dp
>
> # Site DTC01
>   192.168.25.1  04/03    /dev/dtc0143           /etc/ddfa/pcf
> # Site DTC02
>   192.168.25.2  03/07    /dev/dtc0237           /etc/ddfa/pcf
>
> # more /etc/ddfa/pcf
>
> telnet_mode:    enable
> timing_mark:    enable
> telnet_timer:   120
> binary_mode:    disable
> open_tries:     1500
> open_timer:     30
> close_timer:    5
> status_request: disable
> status_timer:   30
> eightbit:       disable
> tcp_nodelay:    enable
>
> Hope this helps,
> Stoney Ratliff
> R&R Computer Services
> ======================================================
>