When I try to connect PCs to the HP3000 using Reflections for HP version 6,
I often get this message:

      NS/3000 NetIPC ERROR IN VT;
      JOB: #S1072;PIN: 151; Info:1-
      ERROR:42;

Anyone have any idea what this is?

I had some luck with your previous suggestions about why my Reflections
sessions were getting kicked out. All my PC NICs were running at 100Mbps
while the HP3000 was at 10Mbps. I changed all the NICs on the PCs to
10Mbps/Half-duplex and it works better, but there are still some troubles,
like the error above. Like I said, I'm new to all of this. I'm the
Microsoft administrator here, and I know just about NOTHING about the
HP3000 or Reflections.
Reflections seems to WORK, but the sessions keep getting terminated. It
seems to happen most often during multiple LOCH requests. I certainly
haven't ruled out a physical setup error, since the conversion from 100Mbps
to 10Mbps worked so well. I might mention that the connections in the LOCAL
office (Local to the HP3000) work MUCH better than the connections from the
remote office. They are travelling over a T1 through 2 Cisco 1750 routers
and then through the D-Link Hub to reach the HP3000. Maybe this will help...
I really appreciate all of your help so far!!

      Mike