I meant the HP3000 FWSCSI card.

And the way to tell is not that simple.

You need to use CSTM and have a suplicense code.


At 05:32 PM 2004-01-16, Johnson, Tracy wrote:
>Belay that last.  I was thinking the Nike FWSCSI card,
>not the HP3000 FWSCSI card.
>
>BT
>
>
>Tracy Johnson
>MSI Schaevitz Sensors
>
> > -----Original Message-----
> > From: Gilles Schipper [mailto:[log in to unmask]]
> > Sent: Friday, January 16, 2004 5:14 PM
> > To: [log in to unmask]
> > Subject: Re: [HP3000-L] SYSGEN and Raid 1/0 - Config
> >
> >
> > What is the firmware rev. of your fwscsi card?
> >
> > It needs to be 3636 or greater. Preferably 3728.
> >
> > Also, I'm quite sure that the HP3000 supports only raid
> > levels 1 and 5 for
> > the mod20 - and only raid 1 as a boot disk.
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651   Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000     Fax: 905.889.3001
email:  [log in to unmask]  web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *