To the list,
Here's an update. The HP CE replaced the failed drive in our XP RAID-5 raid
set and after that raid set had rebuilt for 25% the HP3000 system woke up
and now is running. All the processes appeared to wait for 8 hours until
the disk was ready.
We're not sure what caused the outage or what brought it back to life. I'm
now trying to review the log files on our system to see if it points to
anything.
David Knispel
[log in to unmask]
Phone: 513-248-5029
Fax: 513-248-2672
-----Original Message-----
From: David Knispel [mailto:[log in to unmask]]
Sent: Friday, September 26, 2003 3:05 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] HP3000-XP512 Problem
Craig,
I don't have a Visio diagram but our HP3000 environment is pretty straight
forward.
LDEV 100-119 - fiber card - fiber cable - XP port
LDEV 200-219 - fiber card - fiber cable - XP port
No fiber switches, no bridges, just direct connectivity between the XP and
the HP3000.
David Knispel
[log in to unmask]
Phone: 513-248-5029
Fax: 513-248-2672
-----Original Message-----
From: Craig Lalley [mailto:[log in to unmask]]
Sent: Friday, September 26, 2003 2:29 PM
To: David Knispel; [log in to unmask]
Subject: Re: HP3000-XP512 Problem
David,
I would be more concerned about what the XP is saying than the HP.
The HP sees one LUN (in a series of LUNs) that is busy.
What is the connectivity? Are you using those A5814A routers, have you
tried
rebooting the router? What about the Brocade switch?
Do you have a visio diagram or map of your environment?
-Craig
--- David Knispel <[log in to unmask]> wrote:
> Help!
>
> Here's the problem. My HPe3000 MPEiX 7.5 system is locked up and has been
> since about 8am this morning. I can still log onto the system using
> ;PARM=-1 because what appears to be locked is my XP and not my internal
boot
> drive. When I do a DSTAT all one of the XP presented LUN's is showing as
> below...
>
> ...
> 234-OPEN-E MEMBER MEMBER33 XP01_SET-0
> 235-OPEN-E MEMBER MEMBER34 XP01_SET-0
> 236- BUSY MEMBER MEMBER35 XP01_SET-0
> 237-OPEN-E MEMBER MEMBER36 XP01_SET-0
> 238-OPEN-E MEMBER MEMBER37 XP01_SET-0
> ...
>
> We've replaced the fiber cable and it still acts the same. I've not
> rebooted the 3000 yet. Might that help? Has anyone seen this before? HP
> has been here since this morning and they are puzzled. I thought I'd try
> asking you all to see if you had any ideas...
>
> David Knispel
> [log in to unmask]
> Phone: 513-248-5029
> Fax: 513-248-2672
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
