Mark
This email in RED below was from DISC support.
Basically re-index and set the TPI as required.
Ray
We reindex once a week. After re-indexing, we run
!comment -----------------------------------------------
!comment Now enable the TPI for OMNIDEX
!comment -----------------------------------------------
!run dbinstal.pub.disc307
zolrdb.PUB
set tpi on
e
!
!# above space required
-----Original Message-----
Subje: RE: TPI NOXM what cmd turns it back on
Ray,
Set tpi off - turns tpi off no matter how it was turned on.
Set tpi on - turns on tpi with transaction management on the indexes.
Set tpi noxm - turns on tpi with no transaction management on the
indexes.
Thanks
> From Omnidex-----
>
> Also, TPI settings apply only to Omnidex enhanced (Installed)
Databases.
> I see here that you were using the command on a non-Omnidex enhanced
> database.
>
> Cmd: set tpi noxm
> TPI will be enabled during installation
>
> The statement above that "TPI will be enabled during installation"
> only applies to the current session within dbinstal. That means that
> if you install as I do below, TPI will be set at the end of the
> Omnidex installation. It is more common to SET TPI {ON|OFF|NOXM} on a
> currently Omnidex enhanced database.
>
> HPIX3> [DMDDEV.DMD]:run dbinstal.pub.disc308
>
>
> OMNIDEX DBInstal, Release 3.8.14 Tue Dec 5 2006 09:27:42
> (c) Copyright 1981-1998 Dynamic Information Systems Corporation
>
> Database or Environment: sales.demodb
>
> Cmd: set tpi noxm
> TPI will be enabled during installation
>
> Cmd: i
>
> ** OMNIDEX MultiDimensional/Keyword (MDK) Index Installation **
>
> Enter Tables (Data Sets) and Columns (Data Items) to be indexed
>
> To create an index comprised of all or parts of one or more columns,
> enter an Index Name followed by '!' at the Column prompt
>
> Enter '?' for a list of Tables or Columns, '/' to exit the current
> prompt
>
> Table name? customers
> Column name: contact
> Column name: /
> Table name? /
>
> Specification of MDK indexes is complete
>
> ** OMNIDEX Aggregation/Sorted_Key (ASK) Index Installation **
>
> Table name? /
>
> Proceed with installation? [Y]
>
> Use the Build command to load the following indexes:
>
> CUSTOMERS (Omnidex MDK)
> TurboIMAGE TPI enabled
>
> Rootfile lgth = 4096 bytes. Installation complete.
>
> Cmd: quit
>
> END OF PROGRAM
> HPIX3> [DMDDEV.DMD]:
>
> Thanks,
>
> Derek
>
> -----Original Message-----
> Subject: RE: TPI NOXM what cmd turns it back on
>
> Ray,
>
> Set tpi off - turns tpi off no matter how it was turned on.
>
> Set tpi on - turns on tpi with transaction management on the indexes.
>
> Set tpi noxm - turns on tpi with no transaction management on the
> indexes.
>
> Thanks
> Jeff
> -----Original Message-----
> From: Rao, Raghu [mailto:[log in to unmask]]
> Sent: Tuesday, July 31, 2007 6:09 PM
> Subject: STALLED TRANSACTION: EXCEEDED ACCUMULATED LOG DATA THRESHOLD
>
> Any help is really appreciated.. Thanks..
>
>
> 600 :RUN BCP0100.PROGXL.!HPACCOUNT;XL="!QXLINFO";NMSTACK=1300000
> 601
> 602
> 603 ** BCP0100 VERSION 11.01.08.04 02/27/2004 01:02 AM **
> 604 ** Copyright AMISYS, LLC **
> 605 ** 1990-2003 All Rights Reserved **
> 606
> 607
> 608 Enter the Mode : 1
> 609
> 610 Enter the Batch/Operator : @
> 611
> 612 Enter the Claim Type : @
> 613
> 614 Enter the Effective Date : 19000101
> 615
> 616 Enter the End date : 99991231
> 617
> 618 Enter the Action Trigger :
> 619
> 620 Enter the User Op# : *SYS
> 621
> 622 Enter the Load EX-Code flag: N
> 624
> 625 **** STALLED TRANSACTION: EXCEEDED ACCUMULATED LOG DATA
> THRESHOLD
>
> 627 WARNING ** One or more entries on the error stack have been
> overwritten.
> 628
> 629 HPE Error Management message 205
> 630
> 631 WARNING ** Message set 185, Error number 1030 was not found
in
> the syste
> 632 m catalog.
> 633
> 634 Intrinsic layer; an access violation occurred.
> 635
> 636 File System message 3
> 637
> 638 Intrinsic layer; an access violation occurred.
> 639
> 640 File System message 3
> 641
> 642 Intrinsic layer; an access violation occurred.
> 643
> 644 File System message 3
> 645
> 646 Intrinsic layer; an access violation occurred.
> 647
> 648 File System message 3
> 649
> 650 Intrinsic layer; an access violation occurred.
> 651
> 652 File System message 3
> 653
> 654 Intrinsic layer; an access violation occurred.
> 655
> 656 File System message 3
> 657
> 658 Intrinsic layer; an access violation occurred.
> 659
> 660 File System message 3
> 661
> 662 Specifying the LONG MAPPED OPTION (item# 21) for this file
> type is inval
> 663 id.
> 664 (FILE OPEN ERROR -299)
> 665
> 666 File System message 299
> 667
> 668 Specifying the LONG MAPPED OPTION (item# 21) for this file
> type is inval
> 669 id.
> 670 (FILE OPEN ERROR -299)
> 671
> 672 File System message 299
> 673
> 674 Intrinsic layer; an access violation occurred.
> 675
> 676 File System message 3
> 677
> 678 Intrinsic layer; an access violation occurred.
> 679
> 680 File System message 3
> 681
> 682 Intrinsic layer; an access violation occurred.
> 683
> 684 File System message 3
> 685
> 686 Intrinsic layer; an access violation occurred.
> 687
> 688 File System message 3
> 689
> 690 Intrinsic layer; the operation could not be completed because
> a nonexist
> 691 ent
> 692 file was specified.
> 693
> 694 File System message 38
> 695
> 696 FLABELINFO intrinsic.
> 697
> 698 SUBSYS_INTRIN_ID message 25
> 699 ABORT: BCP0100.PROGXL.AMISYS
> 700 NM SYS a.00fdbf70 dbg_abort_trace+$28
> 701 NM USER 1a0.00d57d94 PROC'EXIT000445+$78
> 702 NM PROG 357.00074544 bcp0100$006$+$3aac
> 704
> 705 RUN
> BCP0100.PROGXL.AMISYS;XL="XL.PUB.AMISYS,XL.OW.DISC3,xl0707c2.pub.hss,P
> HL IBXLS.PH839C.COGNOS,XLOMNIDX.PUB.SYS,ST2XL.PU
> 706 LAMISYS.PUB.SYS";NMSTACK=1300000
> 707 Program terminated in an error state. (CIERR 976)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
>
> Raghu Rao
> Preferred Care - Senior Systems Analyst
> 259 Monroe Ave.
> Rochester, NY 14607
> 585.327.5755
>
> Confidentiality Notice:
> The information contained in this electronic message is intended for
> the exclusive use of the individual or entity named above and may
> contain privileged or confidential information. If the reader of this
> message is not the intended recipient or the employee or agent
> responsible to deliver it to the intended recipient, you are hereby
> notified that dissemination, distribution or copying of this
> information is prohibited. If you have received this communication in
> error, please notify the sender immediately by telephone and destroy
> the copies you received.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
--
"If hard work were such a wonderful thing, you'd think rich people would
have kept it all for themselves" - Lane Kirkland
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
