Gary ,

This is cause when a port is configured as a modem port and the dsr/cd
signal is not high from the modem.

here is the text from the HP predictive support manual

| FSERR 68 |  Port  | Insufficient system resources
|          |        |    *   Meaning:  Unable to open the modem
port.                                This error occurs if the modem
signals                                  DSR/CD are not high on a modem
port.


Claude Mecham
---------------------------------------------------
[log in to unmask]
Bringing the airline industry into the 21st century
----------------------------------------------------

 -----Original Message-----
From: Gary Jackson
Sent: Monday, October 13, 1997 10:12 AM
To: [log in to unmask]
Subject: Re: attach to Modem from a HP928

>Wolfgang,
>I use the following job to page me via modem.  It sets a File Equation
to
>the Device that the modem is attached to.  Then redirects an Echo to
that
>File Eq.
>
>!JOB PAGEME,MANAGER.SYS
>!FILE PAGEOUT;DEV=110
>!ECHO ATDT5559595,,,,,00*!HPHOUR*!HPMINUTE   >*PAGEOUT
>!PAUSE 120
>!ECHO ATDT5559595,,,,,00*!HPHOUR*!HPMINUTE   >*PAGEOUT
>!pause 60
>!EOJ
>
>Thanks
>Steve Murphy
>World Color - Salem
>


I tried the job mentioned above, and it didn't work:

 :FILE PAGEOUT;DEV=105
 :ECHO ATDT407,,,,,00*!HPHOUR*!HPMINUTE   >*PAGEOUT
 ECHO ATDT407,,,,,00*7*53   >*PAGEOUT
 INSUFFICIENT SYSTEM RESOURCES  (FSERR 68)
 ECHO ATDT407,,,,,00*7*53   >*PAGEOUT
 Couldn't open output redirection file, command failed. (CIERR 9425)
 REMAINDER OF JOB FLUSHED.
 CPU sec. = 1.  elapsed min. = 1.  MON, OCT 13, 1997,  7:53 AM.



Does anyone have any HELPFUL suggestions?

TIA