Wyell,
Did you ever get new mechs? You should be able to use those enclosures and plug an new DDS2 or 3 mech into it...
Over the years, I've replaced every failed DDS1 or 2 drive that fails with C1537A DDS3s with pretty good longevity...
jack
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Wyell Grunwald
Sent: Sunday, January 27, 2013 8:19 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Old tape drives
Sorry gang - location is Pine Grove, PA 17963
what is the location!?
In a message dated 1/27/2013 5:40:31 P.M. US Mountain Standard Time, [log in to unmask] writes:
Anyone interested in two old, non-working external tape drives ?
They could be refurbished or used for parts.
Both are external, SCSI-2 attached devices with HP model C1521B. In SYSGEN they are configured as HPC1521B. They both power on, are recognized on the system, and try to write tapes, but they both have unit failures. These two have both been on clean, uninterruptable power.
The front says HP6400 2000 DC.
Up until this week, they worked just fine.
Wyell
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Call us today about our Windows consulting for monthly support services, plus configurations and migrations.
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
