David,

You MUST have an LP device in SYSGEN located at any path and using any ldev
you choose although I believe the default is ldev6.

You can configure this pseudo LP device on any SE path you choose using
ID=HP5000/F100

HTH,

Guy

-----Original Message-----
From: David Knispel [mailto:[log in to unmask]]
Sent: Friday, November 16, 2001 13:23
To: [log in to unmask]
Subject: Removing HP-IB


To the list,

I'm removing the HP-IB card from my system this weekend.  This will remove
one occurence of LP.  One of my network printers is also called LP (ldev71).

Is this going to be a problem that the only definition of LP is a network
printer that isn't there at startup?

I also plan on added a FW card in the slot where the HP-IB card was.  Any
check lists out there for adding hardware to the HP3000?

David Knispel
[log in to unmask]
Phone: 513-248-5029
Fax: 513-248-2672

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *