The ONLY thing running on the system, turbostore in a job, parallel to 3 DLT8000's.
After a reboot, I didn't even bring up the network, this has happened 3 times in a row
I got the powerfail two out of three times, but I find it hard to believe it is a power issue.
Maybe a bad tape drive, but not power. Should a tape drive cause a system abort?
Any ideas? Any one?
TIA,
-Craig
Environment
N-Class 750/400
full patched
native fiber to an XP512
Backing up to 3 DLT8000.
************
16:00/#J1/70/STORE OPERATION IS 15% COMPLETE
16:02/#J1/70/STORE OPERATION IS 16% COMPLETE
16:02/#J1/73/STORE/RESTORE ENCOUNTERED A POWERFAIL ON LDEV 28
SYSTEM ABORT 1457 FROM SUBSYSTEM 102
SECONDARY STATUS: INFO = -300, SUBSYS = 107
SYSTEM HALT 7, $05B1
***************
Here is what the dump shows
Dump Title: POWER FAIL DUMP
Last PIN : 4 On ICS stack -- Dispatcher running
$149 ($0) nmdat > process_current
************************ NO CURRENT PROCESS **********************
RECORD
ICS_INT_NEST_COUNT : 0
ICS_SIZE : 28000
ICS_ON_COUNT : 453338
ICS_ICS_START_TIME : 523bfbb5
ICS_ICS_EXEC_TIME : 123c3
END
==== DISPATCHER GLOBALS ====
AS BASEPRI= $70ff LIMPRI= $4e7f
BS BASEPRI= $4dff LIMPRI= $34ff
CS BASEPRI= $33ff LIMPRI= $1bff MINQUANTUM= $b71b0 MAXQUANTUM= $59682f00
DS BASEPRI= $1aff LIMPRI= $8ff
ES BASEPRI= $7ff LIMPRI= $17f
DGL_PSD_INFO_ARRAY[$0]
RECORD
DGL_PSD_DISP_EVENT_SET : [ ]
DGL_PSD_PROCESSOR_STATUS : DISPATCHER_PAUSED
DGL_PSD_SWAPIN_FAILED : FALSE
DGL_PSD_ADD_A_TOKEN : FALSE
DGL_PSD_ACTIVE_PIB : d48010c0
DGL_PSD_RPSD_PTR : 0.24726280
DGL_PSD_DISP_DISABLE_CNT : 0
DGL_PSD_DELAY_ID : 5d0006
DGL_PSD_MAX_CPU_ID : 5e0007
DGL_PSD_CPU_MEAS_STATE : PROCESSOR_IDLE
DGL_PSD_CPU_MEAS_STATE_TIME : b925183be6d4490
DGL_CARROUSEL_INDEX : 0
DGL_PSD_CURR_EXEC_PRI : ffffffff
DGL_PSD_FILLER :
[ 1 ]: 0
[ 2 ]: 0
[ 3 ]: 0
END
********************* LAST PROCESS INFORMATION *******************
PIN: $4 PROGRAM FILE: ..
Job number 0 does not exist in the system
JOB NUMBER:
Process Library Names:
CORRUPT PROCESS FILE LIST FOR PIN pfl_header.pin<>pin ( )
Error while retrieving the requested data from SYMVAL. (error #5546)
Error evaluating a predefined function. (error #4240)
function is"symval"
Invalid boolean expression for IF THEN ELSE. (error #3200)
if symval(!sys_ptr, '!pm_som:pfl_entry.name')<>'NL.PUB.SYS' then stderr (HP
_CORRUPT_PFL,' ', 'System entry<>NL.PUB.SYS') else { loc e_ptr=symval(!h_ptr,
'!pm_som:pfl_header.subsys_entry'); if e_ptr <> NMNILL then { if symval(!e_pt
r, '!pm_som:pfl_entry.prev')<> NMNILL then stderr (HP_CORRUPT_PFL,' ', 'Prev
ptr on subsys library<>NIL') }; }
^
Macro command aborted due to error. (error #2140)
macro command: "pm_process_file_list"
Macro command aborted due to error. (error #2140)
macro command: "pm_libraries"
Macro command aborted due to error. (error #2140)
macro command: "process_current"
$14a ($4) nmdat >
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|