In <[log in to unmask]> Manuel Pombeiro <[log in to unmask]> writes:
> We are using PC/TCP with Reflection 1 to connect to an HP3000/MPE-iX.
> Each time we try to transfer a file from the host (HP3000) to the PC,
> even during an HP3000 session, appears the message:
> "Unable to get host files; Host does
> not respond"
>
> What configuration should we use in transfer setup (transfer protocol)?
Check the 'startup command' under your file-transfer-setup (where this is
depends on the version of R1 you have) - it's usually something like
RUN PCLINK2.PUB.SYS
Make sure you HAVE the PCLINK2 program on your host. Also, if you are on
MPE/iX 5.0 and in the POSIX shell change the startup to /SYS/PUB/PCLINK2
(or use the predefined setting for MPE/Posix on some R1 versions).
There are other possibilities, but those are the most likely.
-Chris Bartram
______________________/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_
Chris Bartram Sales (US): 800 Net-Mail Fax:+1 916 622-0738
______ -or- +1 916 622-0630 E-Mail: [log in to unmask]
/__ | \__________ Sales (Europe):+44(0480)414131 Fax:+44(0480)414134
/ / | / ________ Sales (Pacific Rim):+61 3 489 8216 (same for fax)
| /_ |< ______ Tech Support:+1 703 569-9189 Fax:+1 703 451-3720
\ __)| \ ___ E-mail: [log in to unmask] Personal(me): [log in to unmask]
\______/ Associates 6901 Old Keene Mill Rd Suite 205 Springfield VA 22150
______________________/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_
Gopher: gopher.3k.com Anon-FTP: ftp.3k.com WWW: http://www.3k.com/