Hello James
Thanks very much, works fine after removing the nmconfig file and
creating a new one, just as you suggested.
THANK YOU!!
Johan
-----Oorspronkelijk bericht-----
Van: HP-3000 Systems Discussion [mailto:[log in to unmask]] Namens
James Hofmeister
Verzonden: Friday, June 16, 2006 16:38
Aan: [log in to unmask]
Onderwerp: [HP3000-L] Configure gateway in NMMGR
Hello Johan Harmsen,
> Searching for subsystem validation routine VALIDATENETXPOR
> ---> VALIDATION OF NETXPORT SUBSYSTEM STARTED <---
> *** VALIDATE ERROR --> PATHNAME : NETXPORT.NI.LAN1.INTERNET
> CONFIGURED GATEWAYS (1) MUST BE <= IPU MAX GATES (0). (VALERR 32)
> ---> VALIDATION OF NETXPORT SUBSYSTEM FINISHED <---
In 5.5 and 6.0 (unpatched) the limit was 14 gateways. This was
increased to
255 gateways with patches and was included in base 6.5 & 7.x.
The fact that validate says "IPU MAX GATES (0)" would indicate to me
that
you have corruption of your configuration file in "at least" the field
that
holds this value.
I would suggest that you want to first keep a copy of this config file,
then
purge NMCONFIG.PUB.SYS and then rebuild your configuration with guided
config.
Note: You could do a copy subtree of the NETXPORT.PROT.IPU field from
NMAUX1.PUB.SYS to NMCONFIG.PUB.SYS to update this field, but at this
point I
would expect problems in this config file with more than just this one
field.
The warranty and liability expired as you read this message.
If the above breaks your system, it's yours and you keep both pieces.
Regards,
James Hofmeister
Email: <first>.<last>@hp.com
Hewlett Packard - Global Solutions Engineering (WTEC)
P.S. My Ideals are my own, not necessarily my employers.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
