In <[log in to unmask]> [log in to unmask] writes:
> > I am attempting to print to a Xerox Docutech printer via IP address. I > hav
> ve
> set up the printer in NPCONFIG.PUB.SYS with an LDEV number, the IP > address
> and the only option of pjl_supported as FALSE.
> >
> > When I try to send a file to that printer I get the following console >
> messages:
> >
> > "Cannot communicate with network printer. Check network xport config, >
> NPCONFIG.PUB.SYS, xport and links started status, intermediate network and >
> printer status."
> >
> > followed by
> > "SNMP error SNMP-Response Timeout reported while retrieving printer > status
> > any hints where I should look to fix this problem.
The SNMP error is the HP telling you "I didn't get an SNMP update from the
printer telling me it was ready/done/asleep/out-of-paper/whatever."
Is it *really* an HP Jetdirect card in that printer? (That's what answers
the SNMP stuff). If not; either go buy a Jetdirect card (nothing else works
with the MPE spooler) or talk to RAC about ESPUL or one of the other third
party spooler packages for the 3000...
-Chris Bartram