Every time I think of "autochanger" the Looney Tunes music of
"Powerhouse" pops into my head:
http://neim0.multiply.com/journal/item/243
Tracy Johnson
Office 1-757-766-4318
[log in to unmask]
> -----Original Message-----
> From: HP-3000 Systems Discussion
> [mailto:[log in to unmask]] On Behalf Of Jack Connor
> Sent: Tuesday, January 11, 2011 7:01 AM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] dds autochanger behaviour
>
> Hi John,
>
> I believe some of the 3rd party backup tools such as Orbit
> have the ability to control the loader robotics.
>
> Typically, there's a second scsi port/address assigned for
> the transport control which allows the selection of specific tape.
>
> For MPE, "stacker" mode is typically selected which tells the
> drive to just mount the next tape in line when requested.
>
> I don't know if the DDS autoloaders have a network connection
> available like the C7145NA DLT autoloaders do; with the web
> interface you can reload any tape, bypass a bad tape, etc.
>
> I'll be interested to know what other solutions folks have
> come up with!
>
> FWIW...
> jack
>
> -----Original Message-----
> From: HP-3000 Systems Discussion
> [mailto:[log in to unmask]] On Behalf Of John Pitman
> Sent: Monday, January 10, 2011 11:59 PM
> To: [log in to unmask]
> Subject: [HP3000-L] dds autochanger behaviour
>
> We have an autochanger as well as a single drive DDS unit. On
> the single its easy (with Stan S's help), using a call to
> something to bring a tape that has just been used back on line ,
> With the autochanger, after a tape is used, the drive IS
> ready to load the next tape (2 lights on front), but the
> drive shows as not ready. When a request for a tape is
> received , the next tapes comes up and works.
> Does any body know how to programmatically control such
> autochangers please? Eg to select a slot, and load the tape
> and come to ready?
>
> Thanks
> john
>
> CAUTION: This message may contain privileged and confidential
> information intended only for the use of the addressee named
> above. If you are not the intended recipient of this message
> you are hereby notified that any use, dissemination,
> distribution or reproduction of this message is prohibited.
> If you have received this message in error please notify RYCO
> Hydraulics Pty. Ltd. immediately. Any views expressed in this
> message are those of the individual sender and may not
> necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> Call us today about our Windows consulting for monthly
> support services, plus configurations and migrations.
>
> CONFIDENTIALITY NOTICE: This communication with its contents
> may contain confidential information. It is solely for the
> use of the intended recipient(s). Unauthorized interception,
> review, use or disclosure is prohibited and may violate
> applicable laws including the Electronic Communications
> Privacy Act. If you are not the intended recipient, please
> contact the sender and destroy all copies of the communication.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|