You are using an old version of sysinfo. If you are on at least PP1 of 60,
you should have version: SysInfo_XL (A.04.00) cm2 10.98
There was a period in the 5.5 time frame when sysinfo lost the ability to
display classes. I recall complaining about it, but since sysinfo is
officially "unsupported", I did not get very far. Don't know when it was
fixed except your example would suggest it was fixed with version A.04.00.
The real question is why you have this older version of sysinfo? What OS
level are you on? From looking at your example, all I can tell is you have
not applied PP1 or PP2 using Patch/iX - you still could be on PP1 or PP2 if
you upgraded directly from 5.5 or have an install from a factory tape.
> -----Original Message-----
> From: James B. Byrne [mailto:[log in to unmask]]
> Sent: Tuesday, January 09, 2001 7:00 AM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] ci command
>
>
> On 8 Jan 2001, at 22:48, Lars Appel wrote:
>
> > :sysinfo.prvxl.telesup "io !device"
>
> I tried this, and a number of the previous suggestions, and
> what I get is this:
>
> :sysinfo.prvxl.telesup "io 4171"
> --------------------------------------------------------------
> ------------
> SysInfo_XL (A.03.08) cm2 02.96 MPE XL - HP3000 System
> Support Tool
> TUE, JAN 9, 2001, 9:42 AM Copyright Hewlett
> Packard Co. 1989
> SysInfo_XL is designed for use by Hewlett Packard Support
> personnel only.
> HP IS NOT LIABLE FOR DAMAGES RESULTING FROM UNAUTHORIZED USE
> --------------------------------------------------------------
> ------------
>
> System Information as of TUE, JAN 9, 2001, 9:42 AM
>
> MPEXL HP31900C.16.01 OS: C.60.00 User Version: C.60.00
> CPU Model: SERIES 918LX Memory : 256 Mb
> CPU ID : 127156311 ($7944057) Single Processor Limited
> to 20 Users
>
>
>
> )io 4171
>
>
> ------------------------- IO Configuration -------------------------
>
> Highest Ldev: 4185
>
> Ldev Path Device Type Device ID Device
> Mgr Class Name
>
> 4171 NONE Serial Printer
>
>
>
> Notice that the Class Name is blank.
>
>
> However showdev shows this:
>
> :showdev hamrmd
> LDEV AVAIL OWNERSHIP VOLID DEN
> ASSOCIATION
>
> 4171 SPOOLED SPOOLER OUT
> 4172 SPOOLED SPOOLER OUT
> 4173 SPOOLED SPOOLER OUT
> :showdev netlp
> LDEV AVAIL OWNERSHIP VOLID DEN
> ASSOCIATION
>
> 4171 SPOOLED SPOOLER OUT
> 4172 SPOOLED SPOOLER OUT
> 4173 SPOOLED SPOOLER OUT
> :showdev netlp71
> LDEV AVAIL OWNERSHIP VOLID DEN
> ASSOCIATION
>
> 4171 SPOOLED SPOOLER OUT
>
>
> What I would really like is this:
>
> :SHOWCLASS 4171
>
> CLASS NAME
>
> HAMRMD 4171+
> NETLP 4171+
> NETLP71 4171
>
> where ####+ means the LDEV is one of many and ####
> means only this LDEV is in that class.
>
> Of course, the + indicator is only a refinement. Just a listing
> of all of the class memberships for a particular device is all
> that I need.
>
> Regards,
> Jim
> --- *** e-mail is not a secure channel ***
> James B. Byrne Harte & Lyne Limited
> vox: +1 905 561 1241 9 Brockley Drive
> fax: +1 905 561 0757 Hamilton, Ontario
> mailto:[log in to unmask] Canada L8E 3C3
>
>
|
