I bet one of them was SHOWCONN, good tool.
On 1/17/24 16:06, Stanfield, Randy (Carrollton, TX) wrote:
> Thanks Tracy. We’re currently using this in our Jinetd today and I can see the FTP logs. I was trying to capture Telnet too. I didn’t know if it would occur in the same Job and couldn’t find documentation for it.
>
> Donna and Robert Mills have passed some logon CMD/UDC’s I can implement to track my telnet connections I think.
>
> Thanks again everyone.
>
>
>
>
> veritiv.com
> RandyStanfield
> Senior IT Architect Infrastructure
> Carrollton•TX
> (972)982-3621
> © 2023 Fortune Media IP Limited. Used under license.
> This email may contain confidential or privileged information. Unless you are the intended
> recipient, delete this email immediately and contact the sender at the address above.
> From: Tracy Johnson<[log in to unmask]>
> Sent: Wednesday, January 17, 2024 2:48 PM
> To: Stanfield, Randy (Carrollton, TX)<[log in to unmask]>;[log in to unmask]
> Subject: Re: [HP3000-L] Telnet services Logging
>
> In your jinetd. net job change the run command to read: !run inetd. net. sys;pri=cs;info="-l Attempted connections will appear in the $STDLIST of the job. You won't get disconnections however. And there is no correlation between an attempted connection
>
>
> In your jinetd.net job change the run command to read:
>
>
>
>
>
> !run inetd.net.sys;pri=cs;info="-l
>
>
>
>
>
> Attempted connections will appear in the $STDLIST of the job.
>
>
>
> You won't get disconnections however. And there is no correlation
>
> between an attempted connection and a log on. You'd have to compare it
>
> with the console. You definitely get the IP address however.
>
>
>
> (One way would be to use MPEX and do a PRINTO;WAIT on the job and have
>
> the CONSOLE to the same window at the same time, that would be active
>
> monitoring.)
>
>
>
>
>
> For FTP logging put this BEFORE the run command of inetd.net.sys, you
>
> can see where it goes:
>
>
>
> !build ftplog.arpa.sys;rec=-256,,f,ascii;disc=4096
>
>
>
> But FTP attempts also show up at the CONSOLE with the IP address.
>
>
>
>
>
> On 1/17/24 14:24, Stanfield, Randy (Carrollton, TX) wrote:
>
>> Does anyone remember if we have a way to LOG the TELNET connections to the HP3000. I don’t want full logging just Initiation connection and IP address and Dissconnect time for the IP address. Similar to what you can get with FTP Logging?
>> veritiv.com
>> RandyStanfield
>> Senior IT Architect Infrastructure
>> Carrollton•TX
>> (972)982-3621
>> © 2023 Fortune Media IP Limited. Used under license.
>> This email may contain confidential or privileged information. Unless you are the intended
>> recipient, delete this email immediately and contact the sender at the address above.
>> * To join/leave the list, search archives, change list settings, *
>> * etc., please visithttps://urldefense.com/v3/__http://raven.utc.edu/archives/hp3000-l.html__;!!BeRq2ZU5pg!qK_g4eQsX34Qr0Shnh3wi-HnMQ8WStjAJ20Vqb93x9oBftEjmOkqvKWLwKFhiS5KSEVox3Anfm4bjarzOI5BC_Tb$<https://urldefense.com/v3/__http:/raven.utc.edu/archives/hp3000-l.html__;!!BeRq2ZU5pg!qK_g4eQsX34Qr0Shnh3wi-HnMQ8WStjAJ20Vqb93x9oBftEjmOkqvKWLwKFhiS5KSEVox3Anfm4bjarzOI5BC_Tb$> *
>
>
> --
>
> Tracy Johnson
>
> BT
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> NNNN
>
>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visithttp://raven.utc.edu/archives/hp3000-l.html *
--
Tracy Johnson
BT
NNNN
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
