Larry,

I use the following:

linkcontrol linkname=@;status=all

which produces,

MPE1#SYS: linkstat
Linkname: DTSLINK   Linktype: 100BT     Linkstate: CONNECTED
Physical Path:              10/4/8
Current Station Address:    00-10-83-04-FB-18
Default Station Address:    00-10-83-04-FB-18
Current Multicast Addresses:
 09-00-09-00-00-01  09-00-09-00-00-03  09-00-09-00-00-04
 09-00-09-00-00-06

Transmit bytes               47449389    Receive bytes
68446547
Transmits                      255096    Receives
224759
Transmits no error             255096    Receives broadcast
875
Transmits dropped                   0    Receives multicast
625
Transmits deferred                  0    Receives no error
259635
Transmits 1 retry                   0    CRC or Maxsize error
0
Transmits >1 retry                  0    Code or Align error
0
Trans 16 collisions                 0    Recv dropped: addr
33376
Trans late collision                0    Recv dropped: buffer
0
Trans underruns                     0    Recv dropped: dma
0
Carrier losses                      0    Recv dropped: other
0
Link disconnects                    0    Recv deferred
0
Link speed                        100    Recv overruns
0
Link duplex                      Full    Link auto sensed
No
Link mode                  100Base-TX    Secs since clear
173595

MPE1#SYS:

HTH,

Rich Rankin
HP Systems Administrator
Clark County Office of Budget and Information  Services
110 E. 13th ST.
Vancouver, WA 98660
[log in to unmask]
http:\\www.co.clark.wa.us
Voice: (360) 397-6121  ext. 7640
Fax:    (360) 759-5972


> -----Original Message-----
> From: Larry Barnes [mailto:[log in to unmask]]
> Sent: Friday, February 25, 2000 8:28 AM
> To: [log in to unmask]
> Subject: Network trouble shooting.
>
>
> I've recently connected our HP3000/987 to our internal
> network.  We are
> attached via cisco routers and switches.  Everything is going
> well with
> occassional complaints about slowness.
> I know there is a tool that lets you see network traffic
> information but
> I don't know what its called.  I looked in nettool but nothing looked
> familiar.
> What is available on the HP that allows me to see the network
> bottlnecks?
>
> --
> Larry Barnes
> Director of MIS
> Mitek Corp.
> 4545 E. Baseline Rd.
> Phoenix, AZ 85040
> [log in to unmask]
>