http://john-burke.com/ArchivedSite/hidden_value/HV_2000_08.htm

Q: While trying to use IOCONFIG to add a network printer, I get the following error message:

**note** Retrieving NMMGR configuration data...
Class(es) updated, so rerun asoctbl.pub.sys to recreate asociate.pub.sys.

keeping to group BOOTUP.SYS

Purge old configuration (yes/no)?Automatic yes

**error** can't purge configuration file MISCP.BOOTUP.SYS

SECURITY VIOLATION (FSERR 93)

followed by a file system tombstone. What does this mean?

A: Ed Stouder and Gerald Dillard replied:

Your last boot was done using "start recovery". This causes the default configuration group to be BOOTUP.SYS, instead of the normal CONFIG.SYS. BOOTUP.SYS is a special configuration group that saves your configuration as of the last START NORECOVERY, and is write protected once the system is up and running. IOCONFIG should have made the changes to the running system, but could not save the changes to the BOOTUP.SYS configuration group. What you need to do is to go into SYSGEN, change the base group to CONFIG and make the changes again; otherwise the next time you boot the system up, you will lose the changes you made. You will even lose the changes if you boot with a START RECOVERY, because the changes could not be written to the BOOTUP.SYS configuration, and that is the one that the system will use with a START RECOVERY.

Is this it?



Roy


Sent from my iPad

> On 20 Sep 2021, at 17:14, James B. Byrne <[log in to unmask]> wrote:
> 
> I tried to add these things via sysgen again and got this:
> 
> :sysgen config
> sysgen> io
>     io> ad ldev=3177;id=hptcpjd;path=none
>        **error** ldev 3177 already exists
>     io> ac class=pdfstm;ldev=4177
>        **error** class  already exists
> 
> Regardless of the errors that were reported the changes that I added today
> through ioconfig are now saved.  I have activated them using doionow.
> 
> What I have to complete is making these changes permanent. A step I evidently
> overlooked when I set these things up the first time.
> 
> I seem to recall that a reboot is necessary.  What specific kind of restart is
> needed and how do I tell it to include the changes?  I am afraid my memory is
> not up to the task of recalling how to do this.
> 
> 
> 
> -- 
> ***          e-Mail is NOT a SECURE channel          ***
>        Do NOT transmit sensitive data via e-Mail
>   Unencrypted messages have no legal claim to privacy
> Do NOT open attachments nor follow links sent by e-Mail
> 
> James B. Byrne                mailto:[log in to unmask]
> Harte & Lyne Limited          http://www.harte-lyne.ca
> 9 Brockley Drive              vox: +1 905 561 1241
> Hamilton, Ontario             fax: +1 905 561 0757
> Canada  L8E 3C3
> 
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *