> I would like to change the default gateway IP Address on our
> HP system.
> Does anyone have instructions on how to do this?

In NMMGR, navigate down to the gateway portion, and you should see the
gateways defined.  There is probably only one (the default).  Modify this
gateway with the new IP address, save and validate the configuration, then
restart the network.

The FKeys needed in NMMGR are as follows:

F1 (open config)
F2 (NS) - F2 (Unguided) - F1 (Netxport) - F3 (Go to NI)
F6 (Modify NI) - F3 (Go to Internet)

You are now at gateways.  If you only have one, then just hit F6 (Modify),
otherwise, enter the name of the gateway and press F6 (Modify).

Enter the IP address, IP restrictions etc, for the gateway, press F6 (Save
Data).

After data is saved, back up 7 screens (press F8 - Prev Screen 6-7 times)
until you are at NMMGR Screen #2 (F5 - Utility) - press this.

F3 - Go to Validate

F1 - Validate Netxport.

After validation is successful, exit NMMGR.  Restart the network.

Best Regards,
Joe

==========================================================
Joe Geiser, Senior Partner, CSI Business Solutions, LLC
 ** Your Client-Server and Internetworking Specialists **
Phone: +1 (215) 945.8100  Fax: +1 (215) 943.8408
*New* Toll-Free (US/Canada): (877) 945-8100
http://www.csillc.com      mailto:[log in to unmask]
==========================================================
HP Channel Partner         Allaire Alliance Partner
Microsoft ClubWin - Team One