"Jamaica" A331xA don't have a controller. Think of the box as
an enclosure. There is one set of dip switches that corresponds
to each slot. The switches are to set each slot's SCSI id in
binary - LSB on the right, up for a 1.

                    Bob J. -- Ideal Computer Services
                    http://www.icsgroup.com



Larry Barnes wrote:
>
> I have an HP Jamaica Disc Drive unit that I think is mis configured.  It
> will hold up to 4 full height drives, currently there are 3 installed.
> When the 987 (test) box boots up it gives me the following error:
>
> LLIO Error - subsys: 213, proc num: -9, error_num: -49 for path 8.0.0
> Error - HLIO device configuration error : -4083 status - subsys: #900
> info: #-4083
> Error - The class Disc, encountered the following error in add_class:
> status - #525 info: #-501
>
> The above errors are related to disc drive # 4, which doesn't mount on
> bootup.  The two other disc in the box do boot up.  On the back of the
> raid controller box (HP model A3312A) there are two channels (A,B)  each
> with 4 dip switches.
>
> Could it be possible that one of the dip switches is set incorrectly?
> If so does anyone know how to set these dip switches to recognize what
> channels to use?
>
> Since this box is not on maintenance I'm looking for any help I can
> get.  If there's documentation available at the hp site I would
> appreciate the url because I couldn't find one.
>
> Thanks, in advance.
>
> --
> Larry Barnes
> Director of I.T.
> Mitek Corp.
> 602-438-4545 x1366
> Phoenix, AZ 85040
>
> Check Us Out !
> http://www.mitekcorp.com