Thanks, I think I got everything I need.

Very much appreciated

--
Michael.


On 11/10/2016 04:15 PM, Mark Ranft wrote:
> AutoRestart/iX is a product.  Many of the benefits of AutoRestart can be had
> without purchasing the product.  But you have to understand how they made
> the product to obtain most of the benefit without purchasing the product.
>
> The Format utility does nothing but add a Cr at the end of the line.  Here's
> how to do it in EDITOR...
>
> :editor
> HP32201A.09.00 EDIT/3000 FRI, MAY 25, 2007, 3:10 AM
> (C) HEWLETT-PACKARD CO. 1993
> /a
> 1 START -R NORECOVERY^^
> 2 //
> ...
> /c "^" to '10 in all
> 1 START -R NORECOVERY
>
> /k AUTOBOOT.MPEXL.SYS,unn
>
> You will still have to create the SLT and UPDATE from it.
>
> Mark Ranft
> Pro3K
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
> Of Michael
> Sent: Thursday, November 10, 2016 2:41 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] AUTOBOOT on a 9x9 box
>
> Thanks everyone!
>
> Apparently, this HP3000 doesn't have the FORMAT.HP36375.TELESUP program, the
> HP36375.TELESUP group exists, but it is empty. Maybe I need to start going
> through my old tapes.
>
> Does anyone care to post a FCOPY;HEX dump of the file that the
> SYSGEN-->SY-->aauto points to, the same file that FORMAT.HP36375.TELESUP
> would output. Having the output in hex, maybe I could write my own version
> of FORMAT.HP36375.TELESUP
>
> OR:
> Could it be that I am missing a product/subsys?
> Is this an add on product?
> I wouldn't want to ask anyone to do anything illegal ;-|
>
> --
> Michael.
>
> On 11/10/2016 11:51 AM, Billy Brewer wrote:
>> Yes once create via EDITOR or your flavor you have to load it through
> BLDDUMP program in TELESUP Acct.  - then load into SYSGEN.
>> - Billy
>>
>>> On Nov 10, 2016, at 12:45 PM, Craig Lalley
> <[log in to unmask]> wrote:
>>> OK, I don't have the dump to disk manual.
>>> But don't you have to parse (run the AUTOBOOT file through some sort
>>> of program?) It's been awhile.
>>> -Craig
>>>
>>>
>>>        From: Michael <[log in to unmask]>
>>> To: [log in to unmask]
>>> Sent: Thursday, November 10, 2016 9:23 AM
>>> Subject: Re: AUTOBOOT on a 9x9 box
>>>
>>> I used QUAD to create the file, typed the START command, hit return,
>>> //, and K AUTOBOOT.MPEX.SYS :U Not sure how to add a CR (%15) at the
>>> end of the START command...
>>>
>>>
>>>> On 11/10/2016 11:09 AM, Tracy Pierce wrote:
>>>> I think there has to be a CR to terminate the command string.  I
>>>> will be corrected shortly...
>>>>
>>>>> On Nov 10, 2016 8:30 AM, "Michael" <[log in to unmask]> wrote:
>>>>>
>>>>> Hey Guys,
>>>>>
>>>>> While I may find my System Manager manual someday, I'm thinking
>>>>> someone on the 3000-L may know the answer. I'm getting an error
>>>>> during system startup..... and I don't have the exact error msg,
>>>>> but it's something like
>>>>> so:
>>>>>
>>>>> Auto Execute file, command string is more than 2048 characters,
>>>>> autoboot aborted.
>>>>>
>>>>>
>>>>> Anyone know what might cause this?
>>>>>
>>>>> --
>>>>> The file in question is defined as follows:
>>>>> FIXED
>>>>> ASCII
>>>>> 72B
>>>>> EOF=1
>>>>> LIMIT=1
>>>>> R/B=1
>>>>> SECTORS=16
>>>>> #X=1
>>>>> MX=1
>>>>>
>>>>> It contains 1 RECORD, & the following string:
>>>>> START NORECOVERY;LOGON=MANAGER.SYS
>>>>>
>>>>> --
>>>>>
>>>>> Much Appreciated!
>>>>>
>>>>> --
>>>>> Michael Anderson.
>>>>>
>>>>> * To join/leave the list, search archives, change list settings, *
>>>>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>>> * To join/leave the list, search archives, change list settings, *
>>>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>> * To join/leave the list, search archives, change list settings, *
>>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>>
>>>
>>>
>>>
>>> * To join/leave the list, search archives, change list settings, *
>>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>> * To join/leave the list, search archives, change list settings, *
>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *