If it fails again, try to boot from a current CSLT and run MAPPER to verify
that the system can see all the drives on your system. You can also use the
search (SEA) command at bootup to verify the system can see lDEV 1.
***************************************************************
CDR Paul Edwards USNR Ret. HP 3000 Certified Consultant
Paul Edwards & Associates Phone: (972) 242-6660
1506 Estates Way Fax : (972) 446-9022
Carrollton TX 75006 Cel : (214) 384-8728
Email: [log in to unmask] Web : www.peassoc.com
***************************************************************
_____
From: [log in to unmask] [mailto:[log in to unmask]]
Sent: Wednesday, February 06, 2008 2:11 PM
To: [log in to unmask]
Subject: RE: [HP3000-L] Sporadic boot problem
Thanks for the response. LDEV 1 is about 2 weeks old !
-------------- Original message --------------
From: "Paul Edwards" <[log in to unmask]>
> It looks like you have a boot disc problem. You may have to replace LDEV
1.
>
>
> ***************************************************************
> CDR Paul Edwards USNR Ret. HP 3000 Certified Consultant
> Paul Edwards & Associates
> 1506 Estates Way Phone: (972) 242-6660
> Carrollton TX 75006 Cel : (214) 384-8728
> Email: [log in to unmask] Web : www.peassoc.com
> ***************************************************************
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
> Of Wyell Grunwald
> Sent: Wednesday, February 06, 2008 1:03 PM
> To: [log in to unmask]
> Subject: [HP3000-L] Sporadic boot problem
>
&g t; I am having problems with my HP 3000 928RX booting properly, and am
looking
> for suggestions of how to fix it. If I get it to boot once, and don't turn
> off the power, I can reboot it many times just fine. The problem comes
when
> I turn off the power, then go to turn it on later. Upon startup, the test
> phase is fine, then ....
> 128 MB of memory configured and tested.
> Primary boot path: 56/52.6 (dec)
> Alternate boot path: 56/52.0 (dec)
> Processor is booting from first available device.
> Trying Primary Boot Path
> --------------------------
> Booting...
> ENTRY_TEST status = 0
> Failed to initialize
> ENTRY_INIT status = -4
> (4 rows of hex numbers here)
> Trying Alternate Boot Path
> ---------------------------
> Booting...
> ENTRY_TEST status = 0
> Failed to initialize
> ENTRY_INIT status = -4
> (4 rows of hex number s here)
> Wyell Grunwald
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|