That sounds like a plan ...
Regards,
John Pitman
-----Original Message-----
From: Jack Connor [mailto:[log in to unmask]]
Sent: Tuesday, 8 November 2011 9:57 AM
To: John Pitman; [log in to unmask]
Subject: RE: [HP3000-L] sysgen io info vs cstm->map info
Yep...there's a different core i/o card for the 9000 which also has a mux i/f.
You can use that SE port to connect the external drive. I'd shutdown the box and make sure the power to the external drive is off before connecting...make sure they have a terminator on the external drive as well as the scsi cable...
jack
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of John Pitman
Sent: Monday, November 07, 2011 5:42 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] sysgen io info vs cstm->map info
959ks400 - I have found the install manual, and it shows a SE socket on rear, and the same bus as the internal tape drive. Curiously the 9000 version seems to have a different set of interfaces on that card....
Regards,
John Pitman
-----Original Message-----
From: Jack Connor [mailto:[log in to unmask]]
Sent: Tuesday, 8 November 2011 9:35 AM
To: John Pitman
Subject: RE: [HP3000-L] sysgen io info vs cstm->map info
What sort of box is it, John?
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of John Pitman
Sent: Monday, November 07, 2011 4:34 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] sysgen io info vs cstm->map info
Thanks for that detail, well worth having!
Another query...When we had a 928 at this site, its internal tape drive died, and we sent up an external unit, and plugged it into the scsi socket on the rear, configured it as ldev 8, and used that - on site personnel really not up to opening the case and swapping internal drives IMHO.
If this external unit is still on site (should be!), and its at least a DDS2, and if there is an SE scsi socket on the rear of the system, we should be able to plug it in there.....Looks like there are both SE and FW SCSI sockets on the back.
If the drive was ldev 8, its scsi address WONT be 0, so it wouldn't conflict.
Plugging it into a running system - would it be seen or not ? Does CSTM MAP go out and look at everything ?
Cant hurt anything if connected while powered off, then powered on ? I know have powered down external tapes , disconnected, reconnected and powered up many times before without issue.
thanks
Regards,
John Pitman
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Kaufman, Larry
Sent: Tuesday, 8 November 2011 12:53 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] sysgen io info vs cstm->map info
John-
1) Make sure he shows up with a Torx set. ;-)
2) Make sure he does not bend any pins on the internal scsi ribbon cable.
3) SCSI ID 0 on that DDS-3 : all jumpers open
Best regards,
Lawrence Kaufman
Systems Engineer / Analyst
Weltman, Weinberg & Reis Co., LPA
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of John Pitman
Sent: Sunday, November 06, 2011 11:17 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] sysgen io info vs cstm->map info
Thanks.
I am trying to avoid having to guide somebody with poor English through ODE and mapper and back out again. I hope that if they install a new drive and reboot, and can see the tape part no with same scsi address as before , it should be good. I will also get them to test reading an old tape, and writing a new one before tech leaves the scene....
Regards,
John Pitman
-----Original Message-----
From: Gilles Schipper [mailto:[log in to unmask]]
Sent: Monday, 7 November 2011 2:43 PM
To: John Pitman; [log in to unmask]
Subject: Re: [HP3000-L] sysgen io info vs cstm->map info
Those aren't ldev's that cstm is showing - they're simply numerical instances.
The scsi address of ldev 7 is defintely 0 - as shown by sysgen and cstm.
At 10:33 PM 2011-11-06, John Pitman wrote:
>On one of our 959s, sysgen for tape drive shows:
>
> io> ldev 7
>LDEV: 7 DEVNAME: OUTDEV: 0 MODE:
R
> ID: HPC1537A RSIZE: 128 DEVTYPE:
TAPE
> PATH: 10/4/20.0.0 MPETYPE: 24
MPESUBTYPE: 7
>CLASS: TAPE
>
>But cstm->map shows:-
>
> 1 10 Bus Adapter (580)
> 2 10/4 Bus Adapter (500)
> 3 10/4/0 NIO LAN/Console Interface
> 4 10/4/16 100 BaseT LAN Interface (
> 5 10/4/20 NIO SCSI Interface (5)
> 6 10/4/20.0.0 SCSI Tape (HPC1537A)
> 7 10/4/20.2 Unknown ()
> 8 10/4/20.8.0 Unknown ()
> 9 10/4/20.9.0 Unknown ()
> 10 10/4/24 NIO Fast/Wide SCSI Interf
> 11 10/4/24.5.0 SCSI Disk (SEAGATEST39175
> 12 10/4/24.6.0 SCSI Disk (SEAGATEST39175
>
>Does this mean the SCSI address of the tape drive is 0, or 2 ? the 0
>addr shows on ldev 6, but 2 on ldev 7 ????
>
>I suspect the devnums on the left in cstm are wrong, as they list the
>discs at 11 and 12, not 1 and 2.
>Unfortunately the people replacing the dead dds3 drive are not famous
>for their knowledge of mpe, so I am trying to ensure they get it right
>first time. I hope just telling them to configure all dip switches same
>as old unit will work for us.
>
>Regards,
>
>John Pitman
>
>
>________________________________
>CAUTION: This message may contain privileged and confidential
>information intended only for the use of the addressee named above.
>If you are not the intended recipient of this message you are hereby
>notified that any use, dissemination, distribution or reproduction of
>this message is prohibited. If you have received this message in error
>please notify RYCO Hydraulics Pty. Ltd. immediately. Any views
>expressed in this message are those of the individual sender and may
>not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------------------------------------------------
-------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Tel: 416.702.7900
email: [log in to unmask] web: http://www.gsainc.com
------------------------------------------------------------------------
-------------------------
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Be sure to ask us about short term and long term rentals on servers, workstations, storage and more!
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Call us today about our Windows consulting for monthly support services, plus configurations and migrations.
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
