On Tuesday, July 01, 1997 4:02 PM, Jim Phillips
[SMTP:[log in to unmask]] wrote:
> My thanks to all who responded to my pleas for help in configuring
> my HP3000 for networking.  I now have the HP3000 network services
> up and running.  I have the HOSTS file on my PC as well as TCP/IP.
> The problem with the HP3000 is that with only one LANIC and DTC's
> already configured (as DTSLINK), to configure a LAN you must use
> the
> DTSLINK name in order to use the same physical path.
>
> However, when running Reflection and attempting to connect to the
> HP3000, I get the following error message:
>
> Required communication software not installed for your VT-MGR
> connection.  Check you network software installation and
> configuration.
>
> This is from inside Reflection.  Does anyone know what it means?


Jim,

You require RNNSVT.DLL (or something similarly named), which is the
NSVT driver for Reflection.  Without it, there is no network
termulation under VT.

WRQ has an add-on for existing Reflection users and costs about
$80.00 which provides this functionality.  For new purchases, you
should order Reflection/1 with NSVT - which gives you NSVT and Serial
connections.

Cheers,
Joe

---------------------------------------------------------------------
Joe Geiser
CSI Business Solutions
140 Bristol-Oxford Valley Road
Suite 102
Langhorne, PA 19047-3083, USA
Phone: +1 (215) 945-8100/Fax: +1 (215) 943-8408
E-Mail:  [log in to unmask]    WWW: http://www.csillc.com
---------------------------------------------------------------------