George, that's perfect ! I didn't want to guess. Thank You ! Dan
_____
From: George Willis [mailto:[log in to unmask]]
Sent: Tuesday, October 04, 2005 1:09 PM
To: Dan Barnes; [log in to unmask]
Subject: RE: [HP3000-L] HP A5159A PCI Dual Port FWD SCSI Host Bus Adapter
configuration question
Dan - here is our configuration for the DLT8000 tapes we have. Hope this
helps you.
PATH: 1/12 LDEV:
ID: PAT_PCI_BC TYPE: BC
PMGR: PCI_ELROY_MGR PMGRPRI: 2
LMGR: MAXIOS: 0
PATH: 1/12/0 LDEV:
ID: PCI_DEVICE TYPE: BC
PMGR: PCI_DEVICE_MGR PMGRPRI: 2
LMGR: MAXIOS: 0
PATH: 1/12/0/0 LDEV:
ID: A5159A TYPE: DA
PMGR: PCI_SCSI_DAM PMGRPRI: 6
LMGR: MAXIOS: 0
PATH: 1/12/0/0.0 LDEV:
ID: PSEUDO TYPE: DA
PMGR: TRANSPARENT_MGR PMGRPRI: 6
LMGR: MAXIOS: 0
PATH: 1/12/0/0.0.0 LDEV: 24 <-------- THIS
IS AN AUTOLOADER
ID: DLT8000 TYPE: TAPE
PMGR: SCSI_TAPE2_DM PMGRPRI: 10
LMGR: LOGICAL_DEVICE_MANAGER MAXIOS: 0
PATH: 1/12/0/1 LDEV:
ID: A5159A TYPE: DA
PMGR: PCI_SCSI_DAM PMGRPRI: 6
LMGR: MAXIOS: 0
PATH: 1/12/0/1.0 LDEV:
ID: PSEUDO TYPE: DA
PMGR: TRANSPARENT_MGR PMGRPRI: 6
LMGR: MAXIOS: 0
PATH: 1/12/0/1.0.0 LDEV: 16 <-------- THIS
IS A STANDALONE DLT
ID: DLT8000 TYPE: TAPE
PMGR: SCSI_TAPE2_DM PMGRPRI: 10
LMGR: LOGICAL_DEVICE_MANAGER MAXIOS: 0
PATH: 1/12/0/1.1 LDEV:
ID: PSEUDO TYPE: DA
PMGR: TRANSPARENT_MGR PMGRPRI: 6
LMGR: MAXIOS: 0
PATH: 1/12/0/1.1.0 LDEV: 17 <-------- THIS
IS A STANDALONE DLT
ID: DLT8000 TYPE: TAPE
PMGR: SCSI_TAPE2_DM PMGRPRI: 10
LMGR: LOGICAL_DEVICE_MANAGER MAXIOS: 0
George Willis
Manager of Portfolio Support Services
Fayez Sarofim & Co.
713-308-2803
[log in to unmask]
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Dan Barnes
Sent: Tuesday, October 04, 2005 12:26 PM
To: [log in to unmask]
Subject: [HP3000-L] HP A5159A PCI Dual Port FWD SCSI Host Bus Adapter
configuration question
Hi -L Gang,
I am getting prepped for the installed of a DLT7000 on one of our N-Class
systems this weekend. This is an N4000-100-330 on MPE/iX 7.0 PP2. I was
told by our CE that the address for the DLT drive itself will be 1/0/0/0.0.
I have, however, in scouring the HP documentation site, failed to find the
additional base path configuration info I will need to enter the
configuration into sysgen for this device. This is the first local N-Class
box (we have all 9x9 boxes) that I have had to personally configure, so have
no experience with this system architecture.
As noted in the subject, the CE will be installing a HP A5159A PCI Dual Port
FWD SCSI Host Bus Adapter.
The 1/ base is configured:
PATH: 1 LDEV:
ID: PAT_IOA_BC TYPE: BC
PMGR: PCI_IKE_MGR PMGRPRI: 2
LMGR: MAXIOS: 0
as well as 1/10 and 1/12 path, but not what I will be using with this new
card installed. If someone could steer to what I have very likely
overlooked at the HP site, I would appreciate it.
Cheers,
Dan
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Confidentiality Notice:
Unless otherwise indicated or obvious from the nature of the communication,
the information contained in this email message is confidential information
intended for the use of the individual or entity named above. If the reader
of this message is not the intended recipient, or the employee or agent
responsible to deliver it to the intended recipient, you are hereby notified
that dissemination, distribution or copying of this communication is
strictly prohibited. If you have received this communication in error,
please immediately return the original message to Fayez Sarofim & Co. at
[log in to unmask] and delete the copy received in error. Thank you.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
