In <90EEE1E62A65D211AF140008C71E25041D5903@KAEXCH> [log in to unmask] writes:

We are currently having exactly the same problem with our Cisco routers
over frame relay.  We have been working on this for several week and
now have it escalated with Cisco.  No good news yet.

Mary


> The Cisco 2500 routers are routing IP only, and to have the DTC in site 1
> communicate with the OpenView PC and the HP 3000 server on site 2 we have
> configured bridging on the router. We first enabled filtering on the Cicso,
> only allowing the OpenView PC and HP 3000 server to get trough, but then the
> DTCs in site 1 could not connect. So we removed the filter from the Cisco
> and the DTCs were able to connect.
>
> According to the HP-3000 FAQ it should only be necessary to bridge the MAC
> address of the Openview PC, but it does not seem to work. Are there anyone
> who's got any experience with this kind of setup? HP themselves where not
> able to help us out with this, at least not the Dutch division.
>