John,
There is a tiny hole in middle, on the back, it should be labeled GSP RESET.
Don't worry, you can reset it in the middle of the day, it will not affect the production side.
-Craig
John Pitman <[log in to unmask]> wrote:
Sorry,
Yes it is an N system.....where does the paper clip go? Dont know that trick.....
Had the dds-2 drive replaced the other day, goy wanted to check it was ok with ioscan. When I told him the bad news he went kind of blank with "Not UX ?"....
jp
________________________________________
From: HP-3000 Systems Discussion [[log in to unmask]] On Behalf Of Craig Lalley [[log in to unmask]]
Sent: Saturday, 8 March 2008 1:36 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] console stuttering
"Dave Powell, MMfab" wrote: I had something similar several years ago. After double checking comm
settings (which I forget), swapping terminals, etc., I took a veeerrrry deep
breath and restarted the system.
That fixed it. I was afraid I would be well & truely (*&^8ed if the console
couldn't to the cpu well enough go get me thru the restart process.
Did John mention the model of HP3K that is having the problem.
If it is an N-Class, it may be helpful to reset the GSP, with the magicial Tech Paper clip.
-Craig
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
