The 2345A is strappable for two input ranges:
"115V config" 90-135V 47.5-66Hz
or
"230V config" 180-275V 47.5-66Hz
To field change the input voltage range:
-remove the power supply
-install correct fuse - for 115V use 5A fuse, for 230V use 3A fuse
-move the strapping cable (between large capacitors C7 and C8) to
desired pin as marked "115V" or "230V"
-correct the input voltage sticker to prevent later headaches,
sparks, and arcs, and balls of fire.
Bob J. -- Ideal Computer Services
http://www.icsgroup.com
"Simonsen, Larry" wrote:
>
> I am on site at a facility in Bangalore India ( much different than
> Springville Utah) we need to change a 2345a dtc/48 from 110 v to 220 v.
> can this be done without replacing the power supply? Any help on this
> would be greatly appreciated.
>
> ------------------------------------------------------------------------
> Larry Simonsen Phone: 801-489-2450
> Flowserve Corporation Fax: 801-491-1750
> PO Box 2200 http://www.flowserve.com
> Springville, UT 84663 e-mail: [log in to unmask]
> ------------------------------------------------------------------------
