Billy,
If you haven't rebooted, I've seen similar issues. From the VT console can you try to do 'abortio 20' until it says no I/O to abort. A WHILE loop may make this easier. I've had luck with this in the past. But since Ctrl-B doesn't work, you may be out of luck.
Mark Ranft
Pro 3K
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Craig Lalley
Sent: Thursday, April 28, 2016 9:21 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Console not Respondin
I did not realize you were on an A or N class system.
My first thought was to get the trusty tech paper clip.
-Craig
From: Billy Brewer <[log in to unmask]>
To: [log in to unmask]
Sent: Thursday, April 28, 2016 3:53 PM
Subject: Re: Console not Respondin
No, I wanted to see if anyone had seen this before, but I will do this
-- thanks.
Billy
-------- Original Message --------
Subject: Re: [HP3000-L] Console not Respondin
From: David N Lukenbill <[log in to unmask]>
Date: Thu, April 28, 2016 6:25 pm
To: [log in to unmask]
Have you tried the reset button on the GSP? A quick press and release might be in order.
DAVID LUKENBILL
Professional System Administrator, Americas - Standard Delivery - Pittsburgh - iACTION Team 2 Member CSC
6908 Mariemont Dr, Louisville, KY 40291
t: +1.502.762.1717 | m: +1.502.931.7261 | [log in to unmask] | www.csc.com
ADVANCE LEAVE NOTIFICATION: None
This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery.
NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose.
From: Billy Brewer <[log in to unmask]>
To: [log in to unmask]
Date: 04/28/2016 06:13 PM
Subject: [HP3000-L] Console not Respondin Sent by: HP-3000 Systems Discussion <[log in to unmask]>
Hi console has become non-responsive after a very short power bleep.
I'm not there but feel comfortable what I have ask has been done, but still nothing on the physical console. So far:
Walked through console configuration - * in Remote Mode - 9600 Baud -,,, all looks good then I had them unplug the cable power cycle the console terminal -- reconfirm the configuration then reconnect and still nothing.
I can connect to the GSP port and the session is connected,, but nothing is displayed,, <ctrl> A nor <ctrl> B works,, type away but no response.
I can them connect via VT-MGR and take the console :console !hpldevin and I receive all the console messages.
So, the messages are being sent (since I see them on the VT connection), but neither the physical console nor the GSP gets any console messages and both non-responsive.
I hope I'm missing something very simple here -- so, what's the issue -- thanks.
-Billy
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
