Greg, 7.0 won't boot up on a 9x7 system. 


***************************************************************
 CDR Paul Edwards USNR Ret.       HP 3000 Certified Consultant 
 Paul Edwards & Associates           
 1506 Estates Way                 Phone: (972) 242-6660   
 Carrollton TX 75006              Cel  : (214) 384-8728
 Email: [log in to unmask]          Web  : www.peassoc.com
***************************************************************
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Greg Terterian
Sent: Monday, August 11, 2008 12:27 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Another question about S927 becoming S918

Now that I know the boards are not interchangable and the chassis is
completely different, I have another question for you (by the way, thanks a
million to all who responded), can I take the internal disk drives from
Series 918RX (it has MPE i/X 7.0 and all the information I would need) and
put them into 927LX.
I also would need to add 10/100 Nic card to 927LX (and the internal disk
drives from Series 918RX already have all the right software and the
configuration for the NIC card).

Will this work with no problem if I just change the boot path for 927LX?? My
main goal is to have MPE i/X 7.0 and Nic card on 927LX.?


* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *