Thanks for all the suggestions. I was off-line for a bit using my
member server PC as a test bed for the scsi drives.
The drive that I was attempting to install MPE on was recognized by
the adapter in my W2KS machine but not by Windows disk manager. I
therefore performed a low level format on the drive from the
adapter following which W2K DM could see it. I then placed the
drive back in the 918LX with the terminators set up as before and I
am happy to report that the INSTALL is proceeding on that drive as
I write this note.
If anything else goes wrong the list members collectively will be
the second ones to know about it. Thank you all very much.
Jim
--
*** e-mail is not a secure channel ***
mailto:byrnejb.<token>@harte-lyne.ca
James B. Byrne Harte & Lyne Limited
vox: +1 905 561 1241 9 Brockley Drive
fax: +1 905 561 0757 Hamilton, Ontario
<token> = hal Canada L8E 3C3
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *