Donald,

For the gateway to be recognized as a default gateway the "@" *MUST* be the
first entry. In fact, once you make this the default gateway the additional
entry for 172.16.4.2 is irrelevant.

Put your "@" in the first entry, validate netxport and issue the command
:NETCONTROL UPDATE=INTERNET;NET=LAN and try it a gain.

Doug.

Doug Werth                             Beechglen Development Inc.
[log in to unmask]                               Cincinnati, Ohio

----- Original Message -----
From: "Donald Frantum" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, April 26, 2001 1:32 PM
Subject: Re: [HP3000-L] How to set Default GATEWAY.


I know where to go to set it up, and I have a similar configuration to what
you provided, but I can't seem to be able to see the second network.  When I
try to ping it, I get "Destination Node does not exist: error #4"

Here is a copy of what is in NMMGR.

NMMGR/3000 (B.06.00) #158  Neighbor Gateway Reachable Networks
Data: Y
When Data Flag is "N", press "Save Data" to create the data record.
Command:
Path:  NETXPORT.NI.LAN.INTERNET.GATEWAY

[B 172.016 005.003]  Neighbor Gateway IP Internet Address

                        Configured Reachable Networks

         IP Network Address      IP Mask (Optional)    Hops
         [B 172.016 004.002]     [255.255.255.000]     [2    ]
         [@                ]     [               ]     [     ]
         [                 ]     [               ]     [     ]
         [                 ]     [               ]     [     ]
         [                 ]     [               ]     [     ]
         [                 ]     [               ]     [     ]
         [                 ]     [               ]     [     ]
         [                 ]     [               ]     [     ]
         [                 ]     [               ]     [     ]
         [                 ]     [               ]     [     ]

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *