What Queue do you have JinetD running in? CS is best
-------------- Original message from "Johnson, Tracy" <[log in to unmask]>: --------------
> So if the gateway is already up, and JINETD is still hung, is it too
> bad?
>
> Tracy Johnson
> Measurement Specialties, Inc.
>
> BT
>
>
>
>
>
>
>
> NNNN
>
>
> > -----Original Message-----
> > From: HP-3000 Systems Discussion
> > [mailto:[log in to unmask]] On Behalf Of Keven Miller (rtt)
> > Sent: Tuesday, March 20, 2007 5:22 PM
> > To: [log in to unmask]
> > Subject: Re: [HP3000-L] Why Does JINETD Hang Sometimes?
> >
> >
> > Johnson, Tracy wrote:
> > > We're having periodic network outages to outside our
> > building (inside
> > > seems O.K.) it was probably our Gateway. A side effect I
> > noticed, is
> > > our JINETD gets hung (inbound FTP and Telnet fail.) Stopping inetd
> > > with -k also fails.
> > >
> > > The only cure seems a reboot. (I haven't tried just
> > shutting down NS,
> > > but if I've gone that far, I may as well reboot.) One good
> > thing is
> > > our users use almost NS/VT exclusively. so I can put off the reboot.
> > >
> > > I'm thinking the probable root cause, is the HP does a
> > reverse lookup
> > > of an incoming session when it is Telnet or FTP, if it
> > can't reach the
> > > Gateway to do the lookup, incoming Telnets fails even
> > locally. (Which
> > > is why NS/VT still works, because the HP doesn't care where the
> > > incoming NS/VT session comes from.)
> >
> > Check that your gateway is still up.
> > :nettool.net.sys
> > NAMEADDR
> > ROUTING
> > GATELIST
> >
> > If its not active, use GATEUP
> >
> >
> > Keven
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|