Bonnie, there are direct connect DTC ports and modem DTC ports. A DTC 16 accepts two cards, each containing 8 ports. The
cards may be either a direct connect card which supports pins 2,3 & 7 or a modem card which supports pins 2,3,4,5,6,7,8,20.
(Hey guys, if I'm wrong here, post a correction! I'm doing this from memory.)
I would suggest you get a DTC 48 which accepts 6 cards and specify one of them to be a modem card. DTC 48's are relatively
cheap used.
Paul Courry
On Tue, 16 Mar 1999 14:03:00 -0500, Bonnie Roman wrote:
>If all your ports are tied up then buying another dtc would be the way to go.
>
>You can purchase
>a dtc 48 or 72mx with 6 port db25 card for your modems. I'm not familiar
>with
>dtc16's!!
>
>Bonnie : - )
>
>
>____________________Reply Separator____________________
>Subject: DTC Question
>Author: [log in to unmask]
>Date: 3/16/99 2:03 PM
>
>Message authorized by:
> : [log in to unmask] at wtpo
>Dumn question time ... here goes.
>
>I have 2 DTC16s...on the back, each DTC has 16 RJ-45 ports. Our set up here
>is Cro-Magnon...everything is serially connected and uses 4-wire phone cord
>with modular to 25-pin or 9-pin converters for terminals or printers or
>PC's. Then we have a short 4-wire cords coming from the back of the
>computer with a RJ-45 plug on the DTC side and RJ-12 on the other end.
>
>So here is the dumn question, finally:
>
>On the one hand, I am successfully using a Multitech Mux to connect three
>DTC ports with a remote location to drive a terminal and two printers, but I
>don't seem to be able to connect a modem to the DTC with the current set up.
>4 wires is not enough, it seems. I hear of DTC's having 25-pin connection
>capability, but mine do not. I am, like, completely ignorant in this area.
>Do I need a different DTC? Do I need different options on my existing DTCs?
>In any case, all 32 of my available ports are currently tied up. So can I
>just buy a new DTC optioned differently? Your experience and wisdom would
>be appreciated.
> Tom Hula
> Victor S. Barnes Company
>
|