Subject: | |
From: | |
Reply To: | |
Date: | Tue, 10 Jun 1997 10:43:00 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
>I am trying to FTP from a 3000 to a site over the internet without
>success. I have setup the neighboring gateway entries in NMMGR and
>still no luck. This is the first time we are going out over the
>internet directly from a 3000. Are there speicial NMMGR configuations
>required. Does anyone have any hints??????
Where exactly is your problem?
Can you ping your FTP destination? If not, you may have at gateway or
router problem.
Can you ping your own IP address. If not, you have a local network
configuration problem.
Can you ping both locations, but are unable to successfully establish a
remote FTP session?
Answers to these would be a good place to start.
---------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP3000 & HP9000 System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000 Fax: 905.889.3001
Internet: [log in to unmask] Compuserve: 71203,474
---------------------------------------------------------------------------
It is difficult to determine exactly where the problem is.
I can not ping the FTP destination from the 3000. If I drop to DOS I
can ping the destination as well as FTP to the remote location. Both
the 3000 and my PC are on the same network utilizing the same router. I
have set up a neighboring gateway entry pointing to the router which
should get us to the remote location. We have these types of
configurations for many other remote locations. The difference is the
other remote locations are over a private network and the one in
question is over the internet.
I can ping my own IP address as well as many other remote and local
addresses.
The following is output from a script which attempts to FTP to the site
in question:
ftp> open xxx.xxx.xx.xxx
220 Secure Gateway FTP server (Version 5.60) ready.
Connected to xxx.xxx.xx.xxx (FTPINFO 40)
Name(mgr): adnoids
331- Connected to netcom.netcom.com.
331- 220 netcom FTP server (Version wu-2.4(2) Tue Jul 5 16:00:01 PDT
1994) ready
331 Password required for aonids.
Password:
230 User aonids logged in.
Remote system type is UNIX.
ftp> cd /u13/aonids/NBTWIZ
250 CWD command successful.
ftp> delete id000073
250 DELE command successful.
ftp> put id000073.ids id000073
200 PORT command successful.
150 Opening ASCII mode data connection for id000073.
DESTINATION UNREACHABLE. (SOCKERR 116)
Data Transfer Request Failed. (FTPERR 13)
ftp> remotehelp
214-The following commands are recognized (* =>'s unimplemented).
USER PORT STOR MSAM* RNTO NLST MKD CDUP
PASS PASV APPE MRSQ* ABOR SITE XMKD XCUP
ACCT* TYPE MLFL* MRCP* DELE SYST RMD STOU
SMNT* STRU MAIL* ALLO CWD STAT XRMD SIZE
REIN* MODE MSND* REST XCWD HELP PWD MDTM
QUIT RETR MSOM* RNFR LIST NOOP XPWD
214 Direct comments to [log in to unmask]
ftp>
**********************************************************************************************
[2]PING>>>ping xxx.xxx.xx.xxx
Name or Address of destination:xxx.xxx.xx.xxx
Sending -----------------------------------------
5 packets of 64 bytes to xxx.xxx.xx.xxx
------------------------------------------
Timeout ocurred. Node may be unreachable
Paul Del Giudice
|
|
|