In order to do this you had to set JOBPRI to 0 in sysstart to allow queues to beadded to jobcards,
now getting back to the queue command and changing it. There was a time when it was important. Back in the days of pre PARisc systems. The systems processors today are much bigger/faster so the queue changes really do not make a large impact. You may be better off setting up jobqueues beyond DQ and EQ.
-------------- Original message from Reid Baxter <[log in to unmask]>: --------------
> The method Gordon mentions is to include on the job card ";PRI=CS" for jobs
> you wish to execute in the CS instead of DS queue. If a job is already
> executing you can use the "SHOWPROC JOB=#Jxxx" and use this information to
> change the priority via the command "ALTPROC JOB=#Jxxx;PRI=CS".
>
> HTH,
>
>
> Regards,
>
> Reid E. Baxter
>
>
>
>
> Gordon Montgomery
> > IPTURES.COM> To
> Sent by: HP-3000 [log in to unmask]
> Systems cc
> Discussion
> > TC.EDU> Re: [HP3000-L] TUNE
>
>
> 09/01/2006 12:53
> PM
>
>
> Please respond to
> Gordon Montgomery
> > IPTURES.COM>
>
>
>
>
>
>
> Why not just stream the jobs in the CS Queue? I don't remember
> exactly how to do it, but I know it can be done. I also used to
> alter jobs after they were streamed to run in the CS queue, but
> again, it has been several years since I have done that. ( And lately
> I'm lucky if I remember what I did yesterday.)
>
> Gordon
>
> ----- Original Message -----
> From: "Michael Caplin"
> To:
> Sent: Friday, September 01, 2006 7:58 AM
> Subject: [HP3000-L] TUNE
>
>
> I've read thru some of the posted messages regarding this but I could use=
>
> some help. Our N class box used to be dedicated at night for batch jobs =
>
> but we're now allowing session users. The session users don't need too =
>
> much but it looks like their presence is degrading the jobs running in th=
> e
> batch queue. Last night (month-end) was a real joy.
>
> I'm planning to schedule a job to run at approx 10:00 pm that will alter =
>
> the DS queue and then put it back to where it was via a second scheuled j=
> ob
> at 5:00 am.
>
> This is the 10:00 pm job. Any suggestions ?
>
> Mike
>
> !COMMENT * THESE ARE THE DEFAULT VALUES
> !COMMENT
> !COMMENT ------QUANTUM-------
> !COMMENT QUEUE BASE LIMIT MIN MAX BOOST TIMESLICE
> !COMMENT ----- ---- ----- --- --- ----- ---------
> !COMMENT CQ 152 200 1 2000 DECAY 200
> !COMMENT DQ 202 238 2000 2000 DECAY 200
> !COMMENT EQ 240 253 2000 2000 DECAY 200
> !
> !TUNE DQ=152,200,1
> !EOJ
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
>
> -----------------------------------------
> This transmission may contain information that is privileged,
> confidential, legally privileged, and/or exempt from disclosure
> under applicable law. If you are not the intended recipient, you
> are hereby notified that any disclosure, copying, distribution, or
> use of the information contained herein (including any reliance
> thereon) is STRICTLY PROHIBITED. Although this transmission and
> any attachments are believed to be free of any virus or other
> defect that might affect any computer system into which it is
> received and opened, it is the responsibility of the recipient to
> ensure that it is virus free and no responsibility is accepted by
> JPMorgan Chase & Co., its subsidiaries and affiliates, as
> applicable, for any loss or damage arising in any way from its use.
> If you received this transmission in error, please immediately
> contact the sender and destroy the material in its entirety,
> whether in electronic or hard copy format. Thank you.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
