RE: [HP3000-L] TR: [HP3000-L] Software on SystemThanks James,
Yes, it shows as a "fully installed product", but still not in the "bundles" section below.
And to answer the other questions: the language in question is C and yes, it is a licensed version.
We get our operating system support through a value added vendor (not directly from HP), but we received the compiler as an HP Prod/Subsys tape from HP after ordering it from our vendor.
Things that make you go, Hmmmmmm.....
Rs~
Russ Smith, Systems Consultant
Problem Solved, Vacaville, CA
r s m i t h @ c u - h e l p . c o m
h p 3 k - l @ e - 3 0 0 0 . n e t
----- Original Message -----
From: Reynolds, James
To: 'Russ Smith'
Sent: Monday, July 31, 2000 1:02 PM
Subject: RE: [HP3000-L] TR: [HP3000-L] Software on System
Russ,
Try this and see if it gets listed.
PSIRPT.PRED.SYS
James
James Reynolds
HP3000 System Administrator
Presbyterian Health Plan
Suite 300
2501 Buena Vista S.E
Albuquerque, NM 87106
[log in to unmask]
505-923-8076
-----Original Message-----
From: Russ Smith [mailto:[log in to unmask]]
Sent: Monday, July 31, 2000 1:51 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] TR: [HP3000-L] Software on System
I'd never run that program before and just ran it on our 937 (55p7). The
resulting output does not contain one of our language compilers, yet the
compiler works fine. Any ideas?
Rs~
Russ Smith, Systems Consultant
Problem Solved, Vacaville, CA
r s m i t h @ c u - h e l p . c o m
h p 3 k - l @ e - 3 0 0 0 . n e t
----- Original Message -----
From: "Christian Lheureux" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, July 31, 2000 4:06 AM
Subject: [HP3000-L] TR: [HP3000-L] Software on System
> I do not know if there have already been any comments on this, I'm just
> back from a 3-week vacation.
>
> But Eric Chamba wrote :
>
> >>Is there a way that you can view the current software that is loaded
> >
> >
> >The complete list should be in HPSWINFO.PUB.SYS
> >
> >Eric Chamba
>
> Sorry, but as I wrote a few months ago, this is NOT correct. HPSWINFO
lists
> all software AVAILABLE on a given release, not all INSTALLED software.
>
> What I understand you refer to is a list of INSTALLED software, i.e. a
> functional equivalent of HP-UX's swlist output. This is available by
> issuing the following command :
>
> run psswinvp.pred.sys;xl='xl.pred.sys,xl.diag.sys'
>
> This line has been cut-and-pasted from an MPE/iX 6.0 system.
>
> Best regards,
>
> Christian Lheureux
> Responsable du Departement Systemes et Reseaux
> Head of Systems and Networks Department
> APPIC R.H.
> HPConnect Systems Integrator / HP3000 Expert / HP e-Partner
> Tel : +33-1-69-80-97-22 / Fax : +33-1-69-80-97-14 / e-mail
> [log in to unmask]
>
|