I have an HP-UX sharing this printer, but also for months.

Antway, I try to change the pjl_supported line.

Thank You.

Beghein Johan.
[log in to unmask]

Dave Knispel <[log in to unmask]> a écrit dans le message :
91l7vb02in2@enews3.newsguy.com...
> To all,
>
> I had this same problem.  The problem showed up once I started printing to
> that same printer with HP-UX. The response center said they knew of this
> problem and had me set "PJL_SUPPORTED = FALSE".  That solved the problem.
>
> David Knispel
> [log in to unmask]
> Phone: 513-248-5029
> Fax: 513-248-2672
> ----- Original Message -----
> From: Robert Mills <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, December 18, 2000 7:32 AM
> Subject: [HP3000-L] Problem with Network Printing, LaserJet 4L and
JetDirect
> box.
>
>
> > Hi fellow listers,
> >
> > Having a problem with network printing to a LaserJet 4L connected via a
> > JetDirect EX Plus (J2591A) box. The file prints again and again and
again
> > and...
> >
> > MPE/iX version is 6.0
> >
> > The relevant entries in NPCONFIG are:
> >
> >         global (message_interval = 60          # Repeat msgs every >= 60
> > secs.
> >                 banner_header = FALSE          # Don't need header
pages.
> >                 banner_trailer = FALSE         # Don't need trailer
pages.
> >                 pjl_supported = TRUE           # LaserJets are full PJL
> > devices.
> >                 jam_recovery = TRUE)           # Reprints jammed pages
by
> > itself.
> >
> >         2013   (network_address = 192.171.2.208     # A4 Landscape (line
> > printer).
> >                 setup_file = A4LANDLP.LJENV.SYSTEMS)
> >
> > The file A4LANDLP contains:
> >
> >         <escape>%-12345X@PJL
> >         @PJL COMMENT
> >         @PJL COMMENT LaserJet A4 Landscape LP Setup File
> >         @PJL COMMENT
> >         @PJL SET PAPER=A4
> >         @PJL SET ORIENTATION=LANDSCAPE
> >         @PJL SET LPARM:PCL SYMSET=ROMAN8
> >         @PJL SET LPARM:PCL PITCH=16.67
> >         @PJL SET FORMLINES=66
> >
> > regards,
> > Robert
> >
> > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> > |Robert W.Mills (Systems Development Manager) |
> > |Windsong Services, St. Mary Cray, ENGLAND    |
> > |Tel  : +44 (0)1689 870622 x3005              |
> > |Fax  : +44 (0)1689 899026                    |
> > |Email: [log in to unmask]  |
> > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>