This is helpful but,  unless the cable is configured correctly it won't
work.
I don't remember what the pinout is for this modem.



Rick Clark wrote:

> Due to popular demand, I decided to post this to the list..... As
> requested, here is the configuration for a modem connected to a DTC and
> used to page a alpha-numeric pager.
>
> 1) In NMMGR, configure the port as follows -
> PATH:  DTS.PROFILE.PAGER
>
> Terminal type         [10]
> Line speed         [9600 ]
> Record width        [80  ]
> Modem type             [0]
> Modem behavior         [0]
> Data length/Parity  [NONE]
> Speed/Parity Sensing?  [N]
> Allow :HELLO logon?  [N]
> Reset HP terminal?     [N]
> NLIO device?         [N]
> Hardware handshaking   [N]
>
> 2) Set the port to refuse sessions....Add this to the SYSSTART file
>     :REFUSE  ldev#
>
> 3) Configure the modem using the AT command
>         &F         Set defaults
>         &C0      Force DCD
>         &D0     Ignore DTR
>         &S0     Force DSR
>         E0         Don't echo
>        Q1         Suppress result codes
>         &W        Keep settings
>
> 4) Connect modem to DTC using the following pin-outs 2-3 3-2 7-7
>
> 5) Issue file equate FILE PAGER;DEV=xxx
>
> 6) ECHO ATDT<pager number>,,,,,,,,,,<status code># >*PAGER
>
>  I had to create the above steps from note scraps so please let me know
> if this works or not... I can adjust if neccessary.
>
> Have a great day!
>
> Rick Clark
> Senior Systems Analyst
> WW&R
> Cleveland, Ohio