I am betting that the Block Mode got turned on.


 
Chuck Trites
Senior Software Consultant

Email:
[log in to unmask] 
Web Page:
www.Crawford-Software.com
Phone:
(603) 537- 9630
Fax:
(603) 375 - 5800
Mobile:
(603) 219-1500
Think before you print.
Notice:  This email message may contain confidential and / or privileged
information.  If you are not an addressee or otherwise authorized to receive
this message, you should not use, copy, disclose or take any action based on
this e-mail or any information contained in the message.  If you have
received this material in error, please advise the sender immediately by
email [log in to unmask] or by phone at (603) 537 - 9630 and delete
this e-mail message
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of joseph dolliver
Sent: Friday, February 06, 2009 1:06 PM
To: [log in to unmask]
Subject: Hung console

We have an issue with the system console.. I had logged the console off from
a remote desk and then performed a startsess 20 manager.sys;nowait. I do
this all the time... Anyway I ran a pscreen at the console and it hung
somewhere in the middle of the scrool and now the console does not respond.
If I hit the break key I get a ":" and cannot type. I aborted the session
which registered at the console and I powered off and still the same
results.

I cannot do a crtl A or ctrl B either.. Replaced the keyboard, then terminal
from known working terminals...

Any I deas before I shutdown to try to clear it?

Thanks in advance...

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *